Review of the Haier HSU-07HTM03/R2 split system: budget price tag with practical filling

Searching for climate control equipment is an extremely long and labor-intensive process.After all, today dozens of manufacturers offer hundreds and thousands of models. But if you are looking for a budget unit and do not have the desire to deal with all the nuances of choice, then the Haier HSU-07HTM03 split system is what you need.

We suggest you understand the features of the device, functionality, nuances of installation and operation of the Haier HSU-07HTM03. A detailed review of the model and comparison with its closest competitors will help you make a decision about purchasing a household split.

Characteristics and advantages of the model

This split system belongs to the type of wall-mounted devices. It is suitable for servicing small spaces, mainly residential areas. Haier HSU-07HTM03/R2 combines various functions that will satisfy every user.

Design features of the split system

The device consists of two blocks: an external one with dimensions of 696/256/432 and an internal one with dimensions of 708x190x263 mm. The compressor of the model is of the non-inverter type. And it is produced by the manufacturing company Rechi.The device's fan has 3 operating speeds.

The total net weight of the unit is 29.4 kg - 22 kg external unit and 7.4 kg internal, respectively.

The materials and assembly of the model leave no doubt about the quality, and the heat exchanger of the unit is covered with an anti-corrosion layer Blue Fin, which significantly prevents the negative impact of the external environment on the device.

The air filters located in the internal block of the model do not have a fine air purification function, but only work for their intended purpose.

The model uses R 410A refrigerant to operate. This is one of those coolants that have been recognized as completely ozone-safe freons. Therefore, you don’t have to worry about the harmful effects of devices on your health.

Performance and operating modes

The manufacturer Haier equipped its model with a power reaching 2050 W. At the same time, the power consumption of the device is about 635 W for heating and 730 W for cooling.

These characteristics set the model's energy consumption class to level C. Energy efficiency coefficients are 2.81/3.22.

This model supports several operating modes:

1. Cooling. The operating temperature range in this mode varies from 10 to 18 degrees. The cooling capacity of the air conditioner is 7000 BTU, which is the average and most optimal indicator.
2. Heating. The temperature range is from -7 to 24 degrees. In this mode, the flow of warm air is supplied with a certain delay, which prevents the release of cold air.
3. Drainage. Air flows in this mode are supplied gradually approaching the temperature set by the user.
4. Auto. The mode allows the split system to automatically select the temperature and fan speed based on the room temperature.
5. Ventilation. This mode is needed to purify and refresh the air in the room. At the same time, other modes will be unavailable.
6. Night mode. This is a very useful function of any split system, which promotes healthy and deep sleep for a person. Temperature and fan speed are adjusted automatically.

A variety of modes allows you to control the microclimate of the room as comfortably as possible. In addition, the model has an additional mode Intelligent Air Flow. It allows the device to select ideal operating parameters.

Great functionality, an affordable price for buyers with any income level and a huge number of operating modes have become one of the main reasons why buyers are actively buying HAIER HSU 07HTM03

Main and additional functions

One of the main functions that a split system can boast of is self-diagnosis of faults, which allows any user to quickly solve any problem that arises.

And we described in detail how to eliminate typical faults of split systems in this material.

In addition, the unit is able to remember the settings and reproduce the last used mode. This greatly simplifies operation and makes use comfortable.

The model has a function to prevent ice formation. This system protects the device from premature failures of unit components and preserves the coating.

Also, Haier HSU-07HTM03/R2 has a smart motion sensor that directs the air flow automatically.

The device also has auto-restart and timer functions.The need for these options is explained by automatic recovery of work after failures, as well as setting a timer to set certain parameters at the right time

The maximum air flow volume limit is set at 7.5 cubic meters/minute. This allows you to work for a room of up to 20 square meters. It is important to note that the airflow is capable of delivering air over a distance of up to 12 meters.

Management and length of communications

The device is controlled using a remote control. It is also possible to manually change and adjust the direction of the air flow.

The equipment has a communications length of 15 meters for installing blocks. Installation of units requires placement in places with a uniform distribution of cold and warm air without an increased concentration of certain substances (salt, oils, gases) or with high humidity. Read more about installing split systems Further.

It is highly not recommended to install climate control equipment yourself. After all, the durability and reliability of a split system largely depends on how correctly it is installed

Customer reviews about the device

The vast majority of users respond positively to the Haier HSU-07HTM03. Almost every buyer talks about the device’s noiselessness, high performance and good price-quality ratio.

The split system, for all its advantages, also has a number of minor flaws. They also need to be considered before purchasing.

Among the obvious shortcomings are the following:

• there is no supply ventilation mode, which limits the user’s ability to supply fresh air from the street to the room;
• small volume of air flow;
• lack of new generation smart functions;
• non-inverter type of device;
• small service area.

With all this said, it is worth saying that in terms of price-quality ratio, the model is not inferior to its competitors. Most of the disadvantages are quite subjective, but when purchasing a split system, all aspects must be taken into account.

We also recommend reading our other article, where we talked about how split systems are maintained. More details - go to link.

Owners speak negatively about the lack of backlighting in the control panel, which is especially unpleasant at night, and point to the low quality of materials. In all other respects, the device, according to customers, is ideal

Comparison of the model with its closest competitors

Buy and choose climate control equipment high quality, which can cope with heating and/or cooling of housing, is simply impossible without comparison with analogues.

The Haier HSU-07HTM03/R2 model has several main competitors, which are in some ways better and in some ways worse than the model in question.

Model #1 - Electrolux EACS-07HPR/N3

The first on the list of competitors is a split system, characterized by a completely new design of the unit, which is located indoors.

The main advantage of the Electrolux EACS-07HPR is its ease of installation and maintenance. This allows you to save a lot of money.

Both units are similar in their noiselessness. Both the Electrolux and the Haier HSU-07HTM03 have a maximum volume of the internal unit that does not exceed 32 dB. As a result, the split system will not be heard at all when it is operating.

When comparing the performance of the devices, no significant differences were found.Both models can produce 2-2.2 kW in cooling/heating modes, which is suitable for servicing 20 sq.m.

Where the Electrolux EACS-07HPR is better is in energy efficiency. But the main thing here is to clarify that the Haier HSU-07HTM03 consumes less electricity only when operating in cooling mode - about 640 W as opposed to 730 W.

During heating operation, the rated power consumption of both devices is completely identical and ranges from 630 to 640 W.

The last thing worth paying attention to is the performance of the climate control fan. For models it differs by only 15 m³/h.

To sum up the comparison, we can say that the model from Electrolux is not inferior to Haier. Their technical characteristics are almost completely identical. But before buying, consider the cost - the price tag of the model is on average 500 - 1,000 rubles higher.

Model #2 - Hyundai H-AR16-07H

If you don’t want or can’t spend about 15,000 rubles on the Haier HSU-07HTM03, then the Hyundai H-AR16-07H would be a good choice. This is a cheaper climate control system that boasts decent power.

The main difference between this model and Hyundai is a greater variety of modes. In addition to heating, dehumidification, cooling, ventilation, automatic operation and night mode, it is equipped with functions I FEEL and condensate drainage in both directions.

Split has Wi-Fi option, which allows you to control the device remotely. Also, for many, the full air dehumidification mode will be useful.

The weight, air consumption, and type of refrigerant used are identical for both models. The significant difference is the operating temperature range. The Haier HSU-07HTM03 has a much wider range - heating - from -7 to +24, cooling from +10 to +18.

As for the Hyundai representative, it can operate for heating at temperatures from 0 to +32 degrees, and for cooling - from +16 to +47 degrees.

Model #3 - Roda RS-A09E

A more powerful competitor to the Haier HSU-07HTM03 is a split system from Roda called RS-A09E. This unit boasts extremely low noise.

For example, when cooling a room, it is practically inaudible, since the volume level does not exceed 24-30 dB.

An important disadvantage of the climate system from Roda is the greater weight of the indoor unit - 8.5 kg. This will create certain difficulties when installing the device, which will not happen if you buy Haier equipment.

A significant advantage of the Roda RS-A09E is its high power in both operating modes. A difference of more than 500 W is quite a significant indicator. Especially when you consider that the cost of the devices is approximately the same.

In conclusion, the Roda RS-A09E is a better value proposition than the Haier HSU-07HTM03, provided you don't mind the hassle of maintenance and installation.

Model #4 - Kentatsu KSGB21HFAN1/KSRB21HFAN1

Last on the list of analogues we should consider the Chinese split system from Kentatsu. In terms of technical characteristics, the presented model is almost completely identical to the Haier brand device.

But despite all the similarities, there are still differences. The first is the price. KSGB21HFAN1 costs 1,000 - 1,500 rubles more. Also, the analogue weighs significantly more. Moreover, this applies to both the internal unit (10 kg versus 7.3) and the external one (29 kg versus 21.6 kg).

Conclusions and best offers on the market

The split system considered is the best example of a relatively inexpensive, but extremely functional climate control system. At the same time, Haier HSU-07HTM03 shows noticeable performance, which will be enough to service 20-25 sq. m. Therefore, when buying it, you will definitely not waste your money.

If you are the owner of this split system, please tell other site visitors whether you are satisfied with the performance of the equipment. Write comments, upload a photo of the device in the communication block, which is located under the article.