The best surface pumps: choosing pumping equipment for home and country communications

An easy-to-use, reliable and productive self-priming automatic pump is designed for pumping water whose temperature does not exceed +35º. The second significant functionality is increasing the pressure in the water supply system. The model is suitable for outdoor work and is weather resistant.

The pump is equipped with intelligent automation that starts and turns off the unit as the owners need water. It can be configured to operate in drip irrigation mode or to supply water to washing machine. If the water level in the source drops, the automation will interrupt the cycle.

Specifications:

• Maximum productivity – 3.5 m³/h;
• Maximum water extraction depth – 7 m;
• Maximum head – 40 m;
• Power consumption – 800 W;
• Maximum pressure – 4 Bar;
• The pump mechanism is centrifugal;
• Protection – from overheating, from idle operation, i.e. from dry running;
• Weight – 8.3 kg.

The GARDENA 3500/4E Classic model is purchased by owners of small country plots with permanent residences and summer cottages. The pump is easy to operate; any malfunctions will be indicated by blinking LEDs. When registering on the website of the official distributor, a guarantee of 3 years 4 months is issued.

The self-priming automatic pump attracts with its performance and ability to create a pressure of 44 m. It perfectly pumps clean water from sources into the water supply system or into a storage tank. However, it cannot be used as a booster pump.

The introduction of the model into an autonomous water supply system allows you to automate its operation. Starting and stopping pumping will be carried out without the participation of the owners. The unit functions excellently in various modes: from supplying water to drip irrigation circuits to servicing washing machines, showers and dishwashers.

Specifications:

• Maximum productivity – 3.8 m³/h;
• Maximum water extraction depth – 8 m;
• Maximum head – 44 m;
• Power consumption – 1200 W;
• Maximum pressure – 4 Bar;
• The pump mechanism is centrifugal;
• Protection – against motor overheating IP44;
• Weight – 7.5 kg.

The Lavor EG-M 3800 automatic pump is an excellent solution for installing autonomous water supply for dachas and small country households. It is convenient to use, easy to operate, and lasts without repairs during the warranty period.

A practical, flawlessly working pump will easily pump out clean water from a depth of 8 m and filter out mineral inclusions larger than 3 mm. Designed for pumping water with a pressure of 45 m.

The model is of the self-priming type: the position of the suction pipe is above the engine axis. Suitable for organizing autonomous water supply. Can be used in aeration irrigation systems and in pumping water from a storage tank to the consumer.

Specifications:

• Maximum productivity – 4.6 m³/h;
• Maximum water extraction depth – 8 m;
• Maximum head – 45 m;
• Power consumption – 1100 W;
• Maximum pressure – 4 Bar;
• The pump mechanism is centrifugal;
• Overheat protection;
• Weight – 7.9 kg.

The Hammer NAC 1000A unit is purchased for organization of autonomous water supply on small suburban areas. The model is distinguished by perfect assembly and trouble-free operation during the warranty period and after it.

The powerful self-priming pump is easy to use, easy to install and connect. The unit is designed to extract clean water from a depth of 9 m and supply it to a height of 50 m. The intake depth is increased due to the built-in ejector.

Based on the GILEX Jumbo 70/50 P automatic pump, you can organize an autonomous water supply for a small country house or cottage. The unit can be programmed to start and stop water intake when the pressure in the system increases and decreases.

Specifications:

• Maximum productivity – 4.2 m³/h;
• Maximum water extraction depth – 9 m;
• Maximum head – 50 m;
• Power consumption – 1100 W;
• Maximum pressure – 2 Bar;
• The pump mechanism is centrifugal;
• Protection – against motor overheating IP54;
• Weight – 10.2 kg.

The body of the model is made of reinforced plastic, thanks to which the developers have significantly reduced weight. The disadvantages of the unit quite rightly include the lack of protection against “dry running”. This means that in order to organize a water supply system, you will also need to purchase an automation unit. The warranty is only for 1 year.

A compact and practical pumping station will provide clean water to a small country house in which the owners live all year round, or to a fairly spacious cottage. The unit is equipped with a 24 liter flexible tank. It will protect against water hammer and provide water in case of power outages.

The Denzel PS1000X model will provide the opportunity to arrange an autonomous water supply with automatic water intake as needed. The operation of the pump and its stop regulates and controls pressure switch. The station can be used both for pumping clean water from a source and for increasing pressure in the water supply system.

Specifications:

• Maximum productivity – 3.5 m³/h;
• Maximum water extraction depth – 8 m;
• Maximum head – 44 m;
• Power consumption – 1000 W;
• Maximum pressure – 4 Bar;
• The pump mechanism is centrifugal;
• Hydraulic tank volume – 24 l;
• Protection – from overheating, from dry running;
• Weight – 13.5 kg.

The station is equipped with a multi-level protection system that prevents engine damage due to operation in extreme conditions. Owners of the model note somewhat noisier operation than sellers claim. The warranty period cannot be called sufficient - only 1 year.

A practical and economical pumping station of the Vikhr brand, ASV-800/24 ​​series, will do an excellent job of drawing water from a well or borehole. It will provide automatic delivery to the consumer.The unit is suitable for increasing pressure in water supply systems transporting a medium with a temperature of no more than +50ºС.

The model consists of an automatic pump and a hydraulic accumulator, which is needed to generate pressure in the autonomous water supply system, reserve water in case of a power outage and smooth out water hammer. The station is equipped with protection against idle operation, i.e. from dry running, and a system that prevents engine overheating.

Specifications:

• Maximum productivity – 3.6 m³/h;
• Maximum water extraction depth – 9 m;
• Maximum head – 40 m;
• Power consumption – 800 W;
• Maximum pressure – 4 Bar;
• The pump mechanism is centrifugal;
• Hydraulic tank volume – 24 l;
• Protection – from overheating, from dry running;
• Weight – 15 kg.

The unit pumps clean water with a low content of solid mineral inclusions. Impurities in the water to be transported may not exceed 150 g. per 1000 l. The pumping station will operate flawlessly if power surges do not exceed ±10%. Operation at -1ºС and below is unacceptable.

The pumping station will easily fill the autonomous water supply system with clean water and supply it to water collection points automatically. The model pumps water not only from sources, but also from storage tanks. Can be configured for irrigation of suburban areas.

The unit is equipped with a condensation-type asynchronous motor, it is protected from overloads and overheating. The hydraulic tank will prevent the impact of water hammer on the equipment and will form a supply of water in case of power supply interruption. However, a device that interrupts idle operation, i.e. when running dry, not included.

Specifications:

• Maximum productivity – 3.3 m³/h;
• Maximum water extraction depth – 8 m;
• Maximum head – 45 m;
• Power consumption – 900 W;
• Maximum pressure – 4.5 Bar;
• The pump mechanism is centrifugal;
• Hydraulic tank volume – 24 l;
• Protection – against engine overheating;
• Weight – 16.2 kg.

If the water supply route and pumping depth are reduced, the Metabo HWW 3300/25 G model will be able to simultaneously service two water points in the house or two sprinkler systems. The body is made of steel, the motor is made of cast iron. Weight significantly complicates the movement of equipment, but allows it to withstand atmospheric negativity. The warranty is valid for 3 years.

A station with average productivity is chosen by the owners of low-rise private houses and country plots. It is used in the construction of a trouble-free system for automatically supplying water to points of consumption. The model is suitable for organizing a site irrigation system and for increasing the pressure in the water supply.

The unit is a complex device that includes an automatic pump and a hydraulic accumulator with a capacity of 18 liters. It forms a supply of water that will help you wait out the period of power outage and smooth out the impact of water hammer. The process of activating and interrupting pumping is controlled by a pressure switch.

Specifications:

• Maximum productivity – 3.0 m³/h;
• Maximum water extraction depth – 9 m;
• Maximum head – 28 m;
• Power consumption – 500 W;
• Maximum pressure – 2 Bar;
• The pump mechanism is centrifugal;
• Hydraulic tank volume – 18 l;
• Protection – against engine overheating;
• Weight – 15.1 kg.

The built-in filter of the model allows you to retain mineral particles up to 0.8 mm in size. To draw water from an open source or an old well, it is recommended to equip the suction pipe with a bottom filter. The manufacturer provides a warranty of only one year for the operation of the unit.

The silently operating circulation pump is attractive due to its economical energy consumption, compact dimensions and ease of installation. The model can be used to stimulate the movement of coolant in closed heating circuits. Also suitable for lines supplying heated sanitary water to mixers.

The pump is equipped with a “wet” rotor and is designed for pumping clean water through closed branches. The working environment should not be viscous or contaminated with mineral particles larger than 1 mm.Its favorable operating temperature is +20ºС.

Specifications:

• Maximum head – 8 m;
• Power consumption – 135 W;
• Throughput – 11 m³/h;
• Maximum ambient temperature – minimum -25°C/maximum +110°C;
• Installation options: horizontal and vertical;
• Protection – against engine overheating;
• Noise – 43 dB;
• Weight – 4.8 kg.

The Grundfos UPS 32-80 180 circulation pump is a programmable device. You can activate its operation with a timer delay and program the switch on and off in accordance with the readings of the thermostat installed for heating. The manufacturer's warranty is valid for 2 years.

The quiet and economical circulation pump can operate continuously for a long period without any problems. The model is designed to stimulate the flow of water as a coolant or its mixture with propylene glycol in 1:1 proportions. Please note that when using viscous antifreeze, the performance of the device is reduced.

The pump has all the advantages of a wet rotor device. Bearings immersed in the pumped medium are constantly lubricated by it, which reduces the load on rubbing parts and increases the service life of the unit. Wear-resistant materials were used in the manufacture of the housing and operating components.

Specifications:

• Maximum head – 4 m;
• Power consumption – 25 W;
• Throughput – 2.9 m³/h;
• Maximum ambient temperature – minimum +2°C/maximum +95°C;
• Installation options: horizontal;
• Overheat protection;
• Noise – less than 43 dB;
• Weight – 2.57 kg.

The circulation pump from Grundfos ALPHA1 L 25-40 180 series works excellently in all types of radiator systems and in heated floors. Its owners have 7 different modes at their disposal.

The pump can be used in systems for supplying hot water to consumers and in water supply circuits that require increasing or maintaining pressure. Activation can be done from a PWM signal.

A single stage pump will increase, stabilize and maintain pressure in forced heating systems. Works excellently in domestic water supply circuits. Can be installed both before and after the water heater.

The device is equipped with a pressure switch, a flow controller and a pressure tank, thanks to which the device can operate in automatic mode. Wilo PB 201EA is suitable for pumping media with high temperatures. The design has an overheating protection system.

Specifications:

• Maximum head – 15 m;
• Power consumption – 340 W;
• Throughput – 3.9 m³/h;
• Maximum ambient temperature – minimum +5°C/maximum +80°C;
• Installation options: horizontal;
• Overheat protection;
• Noise – less than 55 dB;
• Weight – 7.5 kg.

The PB 201EA series circulation pump is suitable for use only with clean water.It is unacceptable for the transported medium to contain organic and mineral impurities. If they are present, a filter must be installed in front of the pump.

Installation and connection of the model can only be carried out by experienced electricians whose qualifications correspond to the category of work performed.

The pump from the company Gilex of the Compass series 25/80 280 is designed to ensure stable movement of the coolant in domestic heating circuits. Suitable for installing radiator heating systems, heated floors, and climate systems such as chiller-fan coil. Cannot be used in systems supplying potable water.

The model can operate in three different modes. The engine of the device is protected from overheating and overloads that threaten it. The presence of a “wet” rotor in the pumped medium constantly lubricates and cools the rubbing parts, which significantly extends the life of the device and eliminates and prevents breakdowns during operation.

Specifications:

• Maximum head – 8 m;
• Power consumption – 135 W;
• Throughput – 12 m³/h;
• Maximum ambient temperature – minimum +10°C/maximum +110°C;
• Installation options: horizontal and vertical;
• Overheat protection;
• Noise – less than 65 dB;
• Weight – 5.5 kg.

The circulation pump is made of wear-resistant materials that have undergone anti-corrosion treatment or covered with an anti-corrosion protective shell. The manufacturer's warranty only applies for one year.

The SANIVITE sewerage installation from the manufacturer SFA is designed to drain dirty water with a slight inclusion of organic matter and mineral particles. Kitchen and sanitary sinks, shower boxes, bathtubs, bidets, washing machines and dishwashers are connected to it. The model is not suitable for receiving waste from a toilet.

Among the attractive qualities of the installation, the first places are occupied by practicality, small size and ease of installation. It does not discharge wastewater into the sewer all the time, but as it fills. Maintenance is extremely simple: for washing, cleaning, and replacing parts, just remove the cover.

Specifications:

• Maximum head – 5 m;
• Power consumption – 400 W;
• Throughput – 6 m³/h;
• Maximum ambient temperature – maximum +60°C;
• Installation options: horizontal;
• Protection – against dry running;
• Noise – less than 42 dB;
• The number of available inputs is 4, 3 of which are side, connected to the main pipe through eccentric devices.

The unit is capable of pumping out wastewater from plumbing fixtures and household appliances located horizontally at a distance of 50 m, and vertically up to 5 m. This model is popular among summer residents, owners of small country houses and offices/shops located in basements and semi-basements.

The Sololift 2 CWC-3 installation is designed to accelerate and stimulate the flow of dirty water and waste into the sewer system. It is connected to household appliances that consume tap water and to plumbing fixtures: bathtubs, sinks, showers, bidets, toilets. Before being discharged into the sewer, organic matter and toilet paper are crushed.

The device allows you to automate the process of discharging waste into the sewer system if its natural movement is difficult or impossible for technical reasons. It is necessary if the output to the centralized system is higher than the plumbing equipment served by the station.

Specifications:

• Maximum head – 8.5 m;
• Power consumption – 620 W;
• Throughput – 8.22 m³/h;
• Maximum ambient temperature – maximum +50°C;
• Installation options: horizontal;
• Overheat protection;
• Noise – less than 42 dB;
• The number of available inputs is 4, 3 of which are side, connected to the main pipe through eccentric devices.

The model is equipped with a cutting attachment that processes small organic inclusions before being discharged into the sewer. The motor is equipped with a protection system that eliminates the possibility of overheating and winding failure.

The design has a carbon filter that eliminates negative sewer odors, and a check valve that prevents sewage from flowing back into the device.

A practical unit for bathrooms and kitchens in basements and basements

A quiet sewer installation is used mainly in the development of residential buildings. It is installed in apartments and hotel rooms organized at the basement level. The model is used in dacha farming if technical circumstances interfere with the natural movement of gray waste into the septic tank.

The SUVERAIN 30-FFA-A station is used to connect the outlets of sinks, shower stalls, bidets, and bathtubs. She perfectly serves washing and dishwashers, without problems cope with water containing grease and dirt. This installation is not suitable for connecting to a toilet.

Specifications:

• Maximum head – 4.0 m;
• Power consumption – 400 W;
• Throughput – 6.0 m³/h;
• Maximum ambient temperature – maximum +35°C;
• Installation options: horizontal;
• Overheat protection;
• Noise – less than 42 dB;
• The number of available inputs is 3.

The sewerage installation engine is protected from overheating, which significantly extends its operating life.The model is equipped with a check valve that prevents the reverse movement of wastewater, and an ejector that ensures pumping and successful drainage of wastewater. The equipment does not require specific maintenance.

The JEMIX STP-250 sanitary installation is designed to stimulate the drainage of dirty water into the sewer system. It is used if technically free movement of wastewater towards unloading is impossible. Household equipment that uses tap water and plumbing fixtures, with the exception of the toilet, are connected to it.

The compact dimensions of the model allow it to be positioned so that the equipment and communications connected to it do not take up too much space from the owners. If it is not possible to install it directly next to the plumbing fixtures, washing machine or dishwasher, the model can be moved to any place convenient for connection, operation and maintenance.

Specifications:

• Maximum head – 5.0 m;
• Power consumption – 250 W;
• Throughput – 4.8 m³/h;
• Maximum ambient temperature – maximum +50°C;
• Installation options: horizontal;
• Overheat protection;
• Noise – less than 42 dB;
• The number of available inputs is 2.

To protect the engine from overheating, there is a built-in system that reacts when the operating temperature limit is exceeded.The unit is equipped with a check valve that prevents the reverse movement of dirty water. Wastewater is discharged into the sewer outlet automatically as it fills.