How to light an Ariston gas water heater: switching features and safety precautions for use
Modern gas devices presented on the market of household water heating equipment meet all European quality and safety standards, and at the same time have a relatively low cost.
But before lighting the Ariston gas water heater and starting to use it, the owner must carefully and in detail familiarize himself with its principle of operation, operating instructions and safety regulations. This is exactly what we will talk about in detail in our article, providing the material with visual photos and video recommendations.
The content of the article:
Design and principle of operation of the column Ariston
There are atmospheric etc.urbanized gas appliances. Atmospheric ones are equipped with an open combustion chamber, while turbocharged have a closed chamber. Rating of the best flow-through geysers reviewed here.
Firm Ariston specializes in the production of boilers and water heaters of both the first and second types and is a leader in the market for the production of water heating devices. We recommend that you familiarize yourself with the details connecting a gas boiler Ariston.
Of the entire model range of the brand, the following models are in greatest demand, according to customer reviews:
- Ariston Fast Evo - a modern water heater with electric ignition and an open combustion chamber, with a built-in flame control system that allows you to maintain a constant temperature in it.
- Ariston Marco Polo Gi7S – the most powerful model with electric ignition and a closed combustion chamber, with electronic control and an overheating protection system.
- Ariston CA 11P – instantaneous gas water heater with system piezo ignition and open combustion chamber, characterized by simplicity and ease of use, belongs to the budget price category.
Despite the diversity of the model range Ariston, all devices have a similar structure, differing only in design and slight differences in design.
In order to understand how to properly use an Ariston gas water heater, let’s look at its structure.
A water heater consists of the following main elements:
- water block;
- gas-burner;
- the combustion chamber;
- heat exchanger;
- chimney;
- fan (if it is a turbocharged model);
- sensors for monitoring fuel supply, water temperature, traction, etc.;
- control Panel.
In addition to the basic configuration of the Ariston gas water heater, the device includes gas supply channels and pipes through which water flows.
On the front of the boiler body there is a control panel that allows the user to control the operation of the device and set the necessary parameters; there are gas and liquid flow regulators. An LCD monitor can also be located here to display the water temperature.
To briefly describe the principle of operation of a gas water heater, it is as follows: gas, burning inside the device, heats tap water, which passes through a heat exchanger and then drains through the tap. You can read more about the principle of operation of a gas water heater in this material.
What you need to know before connecting a gas water heater Ariston
Ariston water heating devices are quite economical and have low gas consumption. At the same time, the boiler has a wide range of operational capabilities.
Before you start using the Ariston gas water heater, you must do the following:
- make sure that the apartment (house) has good ventilation;
- check water pressure — if the pressure mark is below 0.3 atm, then care should be taken to additionally recharge the circuit;
- if there is often a decrease in water pressure in the apartment, you need to make sure that there is no leakage of liquid from the system itself.
It is important to know that identified faults such as low water pressure should only be repaired by a specialist.
Modern Ariston geysers are universal and quite easy to use.To activate them, you just need to press a button. The required temperature on the brand’s gas equipment is set using special control buttons - to supply hot water, it is enough to set 36-56 degrees.
It is also important to know that the water heater starts working immediately after opening the hot water tap. As soon as the user closes the tap, the column stops heating water. If the device needs to be completely turned off, then turn the external switch to the maximum and turn off the gas supply.
Setting up the device when connecting for the first time
When you turn on the Ariston household gas water heater for the first time, it must be configured accordingly. All questions related to the installation of the device are described in detail in Operating Instructions.
The manual includes explanations on how to connect the device to the water supply, turn it on and light the flame. Each action has its own scheme, which must be strictly adhered to in order to avoid problems when using a instantaneous gas water heater.
Correct setting is carried out according to the following algorithm:
- Adjusting the water flow – at this stage the water flow should be adjusted; it should be made minimal (the optimal value is 6, 10 or 12 liters). If this step is not completed at the very beginning, then the entire installation will be inaccurate.
- Adjusting the water temperature – the mixer supplying hot water must be turned/opened to full power. Moreover, it is only allowed to turn on one valve/open one tap in the entire room.Next, the water temperature is adjusted, after which the tap is closed.
- Gas supply adjustment – to do this, you need to clarify the minimum parameter of the unit (you can find it in the data sheet of the Ariston dispenser). To regulate the gas supply, the toggle switch returns to minimum and the gas supply valve opens.
- The next step is to open the hot valve. After this, the water heater immediately starts working - experts recommend waiting for the pressure in the line to drop before starting installation, and then turning the gas regulator to the minimum value until the optimal temperature is reached.
- The final stage is adjusting the hot flow. First you need to open the mixer and evaluate the heating temperature of the flow, which should be 25 degrees higher than at the outlet. Since the gas boiler heater heats the water gradually, you need to wait.
Experts recommend not increasing the temperature of hot water above 55 degrees, since in this case scale deposits will begin in the heat exchanger, which can negatively affect the operation of the device. And in time it will take cleaning the column.
Ignition water heating devices
Depending on the model of the geyser, you can light it in three ways:
- manually - using a piezoelectric element or matches (relevant for older speaker models);
- electric ignition (from batteries or from a 220 V network);
- from a hydraulic turbine.
Manual ignition columns is possible using matches, if we are talking about an old model.
Before turning on such an Ariston gas water heater, you need to perform the following steps:
- Open the water supply tap connected to the device.
- Turn the main valve to allow fuel to flow to the igniter.
- Light the wick with matches.
- Turn on the gas regulator.
This ignition method is not absolutely safe. Therefore, it is necessary to follow all safety rules and keep children away from the device.
Manual option using piezo ignition more comfortable. Simply press a button to light the wick in the combustion chamber. Water heating devices with piezo ignition You don’t have to turn it off completely - when you turn off the water, only the wick will burn. Disadvantage of the method: increased gas consumption.
Devices with automatic ignition the safest and most convenient to use. The latest models of water heating equipment are equipped with this option.
Detailed instructions for turning on the brand column Ariston with automatic ignition:
- Make sure the cold water inlet valve to the water heater is open.
- Make sure the gas valve is also open.
- Check that the batteries are installed correctly (1.5 V LR20).
- Turn the adjustment knob between the minimum and maximum positions.
To turn off the gas water heater, simply close the hot water tap. If you want to completely turn off the gas water heater, you first need to turn the handle (on the control panel) to the OFF position all the way. Then turn off the gas valve on the pipeline.
[adinserter name=”desktop: insert in text – 6″]After complete removal of water, close the water valve on the water supply in front of the gas water heater.
Rules for using speakers in apartments
Each model Ariston Comes with an instruction manual. The instructions explain in detail the basic rules for using the device, safety standards and much more. If you follow all the manufacturer’s recommendations, the service life of the unit will be longer, and the likelihood of malfunctions and dangerous situations will be less.
Manufacturer's recommendations for use
Basic recommendations for use:
- It is not allowed to place foreign objects on the surface of the device.
- The device may only be cleaned and repaired when it is disconnected from all power sources (water, gas, electricity).
- If foreign odors are detected coming from gas equipment, it must be immediately disconnected from the power supply.
- If the combustion products controller fails, the column must not be turned on.
Only if all the above rules are observed, the use of gas equipment Ariston will be safe.
[adinserter name=”desktop: insert in text – 7″]If the device is used incorrectly and is not properly cared for, this can lead to the most unpredictable consequences, including explosions, fires and fatal poisoning. Therefore, to avoid troubles as a result of improper maintenance, it is best to choose a gas company and contract with them maintenance agreement.
Safety regulations
The main safety rules that every consumer who has installed a gas water heater in an apartment (house) should know Ariston:
- If you smell gas, you should immediately stop using gas appliances and turn off the taps of all devices. After this, you must immediately call the emergency service.
- It is not allowed to unauthorizedly carry out gasification of apartments, as well as disconnecting old and connecting new gas appliances.
- It is prohibited to allow children of preschool age, as well as incapacitated persons, to use the speaker.
- It is not permissible to use kitchens and other rooms where gas equipment is installed for sleeping and relaxing.
In gasified rooms, ventilation ducts must be constantly open, and when using gas appliances, the vents must also be opened.
[adinserter name=”desktop: insert in text – 8″]We reviewed more information on safety measures and operating rules for gas equipment in next article.
Conclusions and useful video on the topic
How to properly light a gas water heater - a detailed video review in the following video:
Review of new products in the line of geysers of the Ariston brand:
Gas water heaters Ariston are one of the most reliable water heating devices in the world. In addition, they are very easy to operate and economical in fuel consumption. It is enough to understand how the device lights up to ensure comfortable and quick heating of running water for personal needs.
Do you heat water with an Ariston brand column and want to share with other users the secrets of proper and safe operation of a gas water heater? Or do you have questions that we did not cover in this material? Ask them to our experts and other site visitors, leave your comments - the contact form is located below.
