12 best networked screwdrivers for home and work: review, pros and cons, price, photos
Sometimes you can come across the opinion that a corded screwdriver is bought only because the price is lower than cordless models.At the very least, you definitely don’t need to buy a battery. In fact, a tool powered by an electrical network is a more advanced and reliable device.
The content of the article:
What to look for when choosing a screwdriver?
Anyone who has had to screw several hundred screws a day can confirm that the cordless tool begins to pull hands already on the second hundred fasteners. And even at a high pace of work, the battery tool simply does not have time to charge at least to the minimum level.
If you compare the design of a corded screwdriver with a cordless one, you need to immediately highlight several important features:
- The network model is always lighter than the battery model, even without taking into account the weight of the battery. An adult can easily tighten the fasteners with one hand.
- A screwdriver operating from a socket heats up less and is not as noisy.
- “Networker” is not afraid of vibrations, shocks, and falls on a concrete floor. For cordless tools, mechanical shock has always been a problem and often the cause of battery failure.
- After about 2 years, the cordless screwdriver begins to lose power due to the loss of charge on the batteries.A corded screwdriver lasts at least 10 years.
If you have to work in the cold, then there are practically no alternatives to network models. For battery models, the battery charge drops very quickly.
All models of networked screwdrivers can be divided into two groups. The first category includes “workhorses”, hardy, practical, but not always easy to use. These are usually the best inexpensive corded screwdrivers. The second category includes screwdrivers that were manufactured for sale, at best for home use.
Appearance, design of the body and handle, weight and dimensions, as a rule, do not in any way affect the quality and capabilities of a corded screwdriver. Therefore, it is quite difficult to select a tool based on the picture on the computer screen. This requires experience with screwdrivers.
Most models are available in drill-driver format. This means that such a screwdriver, as a rule, has a self-clamping chuck in which you can secure both a bit and a drill with a diameter of 1-10 mm. This does not affect the installation of the bit. The “fast” chuck holds a drill up to 5 mm without any problems.
Therefore, if most of the work of a corded screwdriver involves drilling, then you need to look for a model with a chuck that is clamped with a key. It is much more reliable, more durable and provides high precision hole drilling.
When choosing a corded screwdriver, you need to pay attention to the basic requirements for the model:
- Electric motor power. If the motor is of high quality (branded), then 250 W will be enough to operate. For use in drill mode, at least 400 W is desirable.
- The main characteristic of a corded screwdriver is torque. To work with a bat, 30-40 N*m is enough; you can easily tighten 5 mm screws to a depth of up to 70 mm.To remove old screws, sometimes even 50 N*m is not enough, 70 N*m is optimal.
- Reduction gear. The most expensive part of the screwdriver. It is better to choose models with a large torque reserve. In such a tool, the gearbox is more powerful, larger gears and satellites are used.
If possible, it is better to give preference to brands and manufacturing companies whose products are famous for their durable and reliable mechanics. Replacing the motor in a corded screwdriver is inexpensive, but repairing the gearbox requires significant effort in selecting high-quality components.
Advice! The quality of the gearbox can always be checked under load. If the case heats up after a couple of dozen screws have been tightened, it makes noise or buzzes, perhaps this screwdriver unit requires adjustment and sometimes replacement of the lubricant.
Typically, a corded screwdriver has two speeds: for drilling and tightening screws. If the model has one speed, then it is a tool without a drill function. Buying such a screwdriver makes sense if the workshop already has a high-quality drill. The simpler the tool, the more reliable it is.
This is useful! The best cordless screwdrivers rating 2023.
The best inexpensive corded screwdrivers
Many budget-level screwdrivers differ from the best corded screwdrivers in the mid-priced niche only by the absence of several functions or less torque. If you buy a tool for your home, it doesn’t have to be BOSCH.
Pulsar DSh 300 792
Inexpensive, but powerful enough - 300 W - that it can also be used as a drill. Developed in the Russian Federation, produced in China.
The quick-release chuck fits either a standard bit or a drill up to 6 mm.The torque is only 19 Nm, but this is enough for drilling small holes and tightening standard carpentry screws.
The torque can be adjusted in 9 positions. Disadvantages include heavy weight (1.3 kg) and a short cable - only 2 m. Price - 1,500 rubles, 12 months of warranty service.
Energomash DS-650
A full-fledged drill-driver that can be used both for home repairs and for small jobs in the country house or garage. The quick-release chuck accommodates a drill up to 10 mm in diameter or a bit. The corded screwdriver comes with two spare contact brushes for the electric motor.
Characteristics:
- power - 650 W. This is the level of an electric corded drill;
- torque - 45 N*m. You can drill holes in metal up to 8 mm, in wood - up to 20 mm;
- weight - 1.3 kg.
There is a reverse, a brake and a shaft lock for removing the tool. The advantages of the Energomash DS-650 screwdriver are smooth startup without strong jerks. Disadvantages - lack of backlight, rapid wear of brushes and short network cable - 2 m.
The price for the model is 2100 rubles. with 14 months of warranty service.
Bison DSH-M3-500
Inexpensive drill-driver, designed for long-term operation in repair conditions. The tool uses a 500 W brushed motor. At the output of the gearbox, the torque is 45 N*m at 500 rpm when tightening fasteners and 1800 rpm when drilling holes. You can select the speed from 21 adjustment positions.
The weight of the Bison is 1.6 kg, the maximum drill size is 13 mm. The advantages of the model include easy maintenance and cleaning from dust; it is possible to manually tighten the cartridge if you plan to tighten screws longer than 70 mm. The power cord of the screwdriver is in soft silicone insulation, length - 5 m.
The price for a network tool is RUB 3,200, 5 years of warranty service.
This is interesting: Which screwdriver is better, cordless or corded?
The best corded screwdrivers in terms of price-quality ratio
The best rating includes models from well-known brands, the cost of which is below the average for corded screwdrivers. The assessment was carried out based on the level of reliability and optimal technical characteristics.
Makita DF0300
In this model, the developers placed the main emphasis on the functions of a networked screwdriver. Therefore, the engine power is up to 320 W, and the torque is increased to 56 N*m. The weight of the corded screwdriver turned out to be relatively small - 1.2 kg.
It is possible to tighten screws by adjusting the torque according to one of 20 settings. The two-stage gearbox can be used at full torque or configured to operate in a soft mode of 21 N*m. There is a function of reverse and blocking the shaft when changing the bit.
Chuck for quick tool fixation (1-10 mm). The design of the corded screwdriver provides protection against dust, resulting in minimal brush wear. Makita DF0300 can be used in open areas and work in very dusty conditions.
The price for the model is 4980 rubles, warranty service for a year, subject to registration of purchase.
Resanta SSH-550-2
Corded screwdriver from a famous Baltic brand. Produced in China. It is distinguished by high-quality assembly and well-optimized characteristics of the mechanical and electrical parts of the tool.
The power of the Resanta brush motor is 550 W, which is already quite a powerful tool with a long service life. It is, rather, an electric drill with a full set of screwdriver functions. The torque on the shaft of the two-stage gearbox is only 36 N*m.This is the optimal value for simple installation and finishing work. The torque on the shaft is enough to tighten a self-tapping screw up to 10 mm in diameter.
The weight of the corded screwdriver is 1.4 kg. The design provides 19 positions for adjusting the torque, there is a reverse and backlight.
The price for Resanta SSh-550-2 is 3,000 rubles, the warranty is 60 months from the date of sale.
Fiolent SHVZ-6-RE
This model belongs to the combined group. A screwdriver and a screwdriver are combined in one design. Designed and produced in the Russian Federation. It is used primarily for laying plasterboard sheets, assembling furniture, various equipment, and can be used for repair work in a car repair shop.
Distinctive features of the Fiolent corded screwdriver:
- power - 610 W, rotation speed can be changed smoothly from 0 to 2800 rpm;
- instead of the usual quick-release chuck, a magnetic holder for screws, self-tapping screws or hex bits is used;
- a precision coupling is installed that ensures an instant, shock-free stop of the shaft when the screw is fully immersed or the screw is tightened.
In addition, you can install a holder attachment for tightening hex nuts and bolts. That is, Fiolent can be considered as a universal drive for tightening fasteners of all types. The only negative is the low quality of the plastic molding of the case. Sometimes you have to adjust parts manually.
The price for Fiolent is 2939 rubles, warranty service for 3 years.
In addition, read: 12 best screwdriver bits.
The best professional corded screwdrivers
A professional level tool is quite expensive.It makes sense to purchase a PRO-level corded screwdriver only if there is a house to be built, major repairs, or similar work has to be done several times a week.
Makita 6805 BV
The corded screwdriver is designed and manufactured in Japan. The tool is designed to work in industrial conditions, with a maximum load of 10-12 hours of working time per day. The design uses a large number of parts made of aluminum and steel, so the screwdriver is heavier than a regular model, weighing 1.9 kg.
The model is equipped with a 510 W brush type motor with a shaft rotation speed of 2500 rpm. The gearbox can be manually adjusted to 6 different torque levels.
Instead of a quick-lock tool chuck, the screwdriver uses a hexagonal profile bit holder. You can install four main attachments: for screws, screws, a socket for nuts and an internal hexagon.
The amount of torque is small, only 26 N*m, but thanks to the presence of reverse, the level of depth control and the breaking clutch, the twisting occurs completely and without impact. Which can be very useful when screwing fasteners into soft cladding.
This model of screwdriver is equipped with additional protective insulation for the electrical part of the tool, so you can work in conditions of high humidity, fog or rain.
The only drawback of the Makita 6805 BV is the short cord.
Price - 8500 rubles, warranty period - 1 year.
This is useful! The best screwdrivers for ice augers: rating 2023, review, price, quality, photo.
Hanskonner HID2145PC
Professional type networking tool. The brand was developed in Germany and produced in China.The peculiarity of the screwdriver is that with a relatively high power of the brush motor (450 W), a high torque (50 N*m) is obtained. Hanskonner HID2145PC can be considered one of the best in terms of “power - torque.”
The result is a networked tool that requires no retooling when driving screws or drilling holes.
Characteristics:
- quick-release chuck for tools 1.5-13 mm. The power on the shaft is enough to effortlessly drill holes in metal with a diameter of up to 13 mm, in wood - up to 20 mm;
- The gearbox has 23 torque control positions;
- weight - 1.9 kg;
- Power cord length - 4 m.
In addition, there is a reverse and an instant shaft stop clutch. Overall, the build quality is much better than most brands, even the likes of Makita or DWT.
The price of a screwdriver is 6,500 rubles, the warranty period is 12 months.
Bosch GSR 6-45 TE
Network tool used in industrial cladding assembly, panel furniture, construction work. One of the most powerful and reliable screwdrivers. The power of the brush motor is about 700 W.
The design uses a clamp for bits and attachments of various profiles with a cross-section of 6.35 mm. The quick-release chuck is not used, and, accordingly, it is not possible to install a drill.
The corded screwdriver turned out to be quite light - 1.4 kg. At the same time, the torque on the shaft is only 12 N*m. That is, even if you install a self-clamping chuck, you can only drill with a screwdriver with a tool up to 3 mm.
The design has a reverse, adjustable immersion depth of fasteners, and a precision shaft stopping clutch. The cord length is 3.9 m. You can install a magazine attachment for quickly feeding screws to the bit.
The tool turned out to be very reliable, with minimal noise and vibration. The only negative of the Bosch GSR 6-45 TE is its price; today the model sells for 22 thousand rubles. The quality of the corded screwdriver can be judged by the fact that the project was developed by BOSCH, and production is located in Switzerland. Warranty - 1 year.
Best Corded Impact Driver
A corded tool may not look very convenient for punching holes. The cord may interfere with operation. But in practice, corded screwdrivers with impact functions turn out to be quite functional and are not inferior in functionality to rotary hammers.
It may seem that having an impact function in a corded screwdriver is impractical. But it is not so. Impact drills and screwdrivers, as a rule, have a mechanical gearbox made of higher quality metal, reinforced bearings and shaft supports. Therefore, even choosing a corded screwdriver-drill makes sense, since the service life of the tool, its reliability and ability to work in extreme conditions are much higher than that of conventional models.
Makita HP0300
This model is an example of how a corded impact driver doesn't have to be big and bulky like most hammer drills. The Makita HP0300 has impact capabilities, full screwdriver capabilities, and the ability to punch holes for dowels.
Characteristics:
- The power of the commutator motor is only 320 W. This is enough for drilling and tightening screws, but not enough for perforating holes. Therefore, the diameter of holes in concrete is limited to 8 mm;
- torque - 56 N*m, the force is sufficient to tighten self-tapping screws up to 120 mm long and 6 mm in diameter. In comfort mode 28 mm;
- drill-driver weight - 1.3 kg;
- quick-release chuck for tools 1-10 mm;
- The length of the power cord is 2.5 m.
The design contains all the basic functions of a screwdriver: reverse, stopping the shaft with a brake, two speeds - for drilling and for screwing in fasteners.
The Makita HP0300 also features enhanced case insulation; this does not mean that the drill/driver can be left in the rain. Additional protection is needed to block dust from entering the brushes and contact pads of the commutator. In terms of protection level, Makita hand power tools can be considered one of the most advanced. At the same time, cleaning the brushes is no more difficult than those of competitors. You can blow it out, or better yet, wash it and clean it with alcohol.
Price - 4600 rubles, warranty - 12 months.
WORX WX318
One of the most powerful impact screwdrivers. The design was developed in Germany and produced in China. The corded tool is equipped with an 810 W motor, with a reinforced gearbox and hammer. Accordingly, the weight increased to 1.7 kg, coming very close in weight characteristics to hammer drill devices.
But the WORX WX318 is still not a hammer drill. The design uses a high-speed and low-noise motor. The tool (bit or drill) is installed in a regular quick-release chuck. Therefore, when operating a screwdriver, there is no noise and rumble characteristic of rotary hammer gearboxes.
The diameter of the tool that can be installed in the chuck is 13 mm. This is enough for any construction and repair work at home.
Features of the WORX WX318 network tool:
- shaft power - 800 W;
- torque at the output of the gearbox - 32 N*m;
- impact frequency when working in perforation mode - 4800.
There is only one speed, but there is a chuck lock button, reverse and the ability to smoothly adjust the speed when working in drilling mode or driving screws. The kit includes a handle for holding the tool with two hands, as well as a carrying case and a set of 6 drills. The cord length is only 2.5 m.
The cost of a corded impact screwdriver is RUB 7,600, with a 12-month warranty.
Deko DKSD400W
The review begins with one of the simplest and most affordable screwdrivers with the functions of a corded drill and hammer drill. Produced in Malaysia and China; if possible, a Malaysian instrument is preferable. Corded screwdrivers from Malaysia have minor drawbacks; the electrical and mechanical parts usually work without any problems.
Features of the network tool:
- power - 400 W;
- torque - 20 N*m;
- weight - 1.3 kg;
- “quick” chuck for drill and bit 0.8-10 mm;
- rotation speed one - 780 rpm;
- power cord - 2 m.
There is a board for smoothly adjusting the speed, you can select the optimal value for drilling or piercing a hole. For concrete, the maximum diameter is 8 mm. The corded screwdriver turned out to be balanced and easy to use. The only negative is that the plastic from which the body of the network tool is cast is quite thin. Therefore, you should avoid dropping the drill/driver on the floor and not leaving it near heating devices.
Price - 1560 rubles, warranty - 1 year.
Which screwdriver is better: corded or cordless?
Each tool has its own advantages and disadvantages. Often a screwdriver, no matter whether corded or cordless, is purchased under the impression of an advertisement or on the advice of friends. In fact, the approach should be strictly individual, taking into account your own preferences and habits.
Advantages and disadvantages of cordless tools
The only important advantage of using a battery instead of a power cord is mobility. That is, you can take the screwdriver to the country house, to the roof, or for winter fishing. In this sense, even an inexpensive screwdriver with a pair of replaceable batteries remains out of competition.
In addition, according to many users, the absence of a power cord makes the tool more convenient to use, especially if you need to constantly move or work with large oversized parts, such as furniture.
If we compare a battery model with a network model of approximately the same class, then the first one always has more torque. The difference can be double. Among battery-powered screwdrivers, there are many models with a torque of 60-70 N*m, there are even 100 N*m. Whereas in network devices the ceiling is 50 N*m, and the average value is 30 N*m.
This means that a cordless screwdriver can be used to drive a very large screw into oak or acacia to a great depth. This is much more difficult to do with a network tool, perhaps only with the most powerful devices. But this “advantage” has one drawback - high torque often causes injury to the hand.
The disadvantages include the need to care for batteries, the need to buy new batteries as the capacity of old ones fades and decreases. Most often, Li-Ion batteries are included, which become unsafe if charged incorrectly. Overcharging, a short circuit in the screwdriver wiring, or a faulty charger can cause a lithium-ion battery to catch fire. In addition, the battery loses a lot of charge in low temperatures.
Why is a corded version of a screwdriver better than a cordless one?
At first glance, there are not many reasons to use a mains-powered tool - less weight due to the absence of a battery and no need to buy new batteries as the old ones wear out. In fact, a corded screwdriver turns out to be more profitable than a battery-powered one, and in addition, it is a reliable, simple and unpretentious device to use.
Advantages of network models:
- Light weight. The center of gravity is shifted to the point of application of torque during the process of driving a screw or drill.
- Less discharge currents flowing through the screwdriver wiring. Battery-powered models get very hot and therefore require intensive cooling of the gearbox and motor.
- With a mains-powered tool, you can drive long 120 mm self-tapping screws without limiting working hours. The battery will overheat after the third or fourth dozen of fasteners are wrapped.
In addition, repairing a corded screwdriver is much cheaper. You can often rewind an electric motor with your own hands. Whereas in a cordless screwdriver, engine repair is often completely impossible.
As a result, corded screwdrivers are chosen primarily for the home workshop. They are not used often, and the presence of a power cord does not in any way affect the result of the work. Moreover, the absence of batteries does not require periodic recharging and running under load.
A corded screwdriver, regardless of the model, lasts quite a long time. Even the appearance of slight play on the shaft due to natural wear of the bearings does not affect its performance. But if the network tool is used primarily as a drill, then it is still better to choose a model with the highest quality mechanics.
Tell us about your experience using corded screwdrivers. Which model do you think deserves more attention? Bookmark the article and share it on social networks.
There is no difference between mains or battery, but the latter are more convenient to work on site. I paid so much for new batteries that I can buy another screwdriver.
Many people buy batteries and then convert them via a power supply to a network version. And scarce batteries are sold at exorbitant prices. Shurik is obtained for a third of the price. This is such a business that you will break your head.