Rating of electric wall heaters 2022 - TOP 10 best

Wall heater is a heating device mounted on the wall. This is convenient because it does not take up space on the floor. There is more free space.

The heater is also small in thickness - it is relatively flat, so it won’t interfere with anyone on the wall. In all other respects, wall heaters are no different from floor-standing counterparts.

Types of wall heaters

Manufacturers offer two types of wall heaters:

• convection;
• infrared.

There are many types of such devices, but they all belong to one of these groups. For example, oil radiators are also convection radiators because they heat the air rising to the ceiling. And cold air rises from the floor to the device, which is heated by it. Air movement occurs, which is called convection.

Convection models are those that heat the surrounding air with their body. And the case is heated by a special element connected to an alternating current network with a voltage of 220 volts.

Convection wall heaters got their name from the device, in the design of which slots were made at the top and bottom, and air moved through them. A gap was left between the heating element and the outer panel of the housing to allow air masses to move.

Some models were equipped with low-power fans that forced air through the gap, thereby increasing the efficiency of the heater.

Infrared models differ in operating principle from convection models. They do not heat the air because they do not release thermal energy. They emit infrared rays like the sun. The rays reach the plane of objects, furniture, building structures (walls, floors, columns, etc.) and heat them. And these planes give off their thermal energy to the air. This is how rooms are heated.

Infrared wall heaters - these are several different devices that differ from each other in the element that emits IR rays:

1. Halogen lamp.
2. A tube made of quartz. A carbon spiral is laid inside it, to which current is supplied.
3. Ceramic heater.

All these devices have almost the same advantages over convection models:

• 100% safety;
• fast heating;
• high efficiency;
• makes virtually no noise during operation;
• savings in energy consumption of 40% compared to convection heaters;
• You can focus the direction of emission of IR rays.

Minuses:

• more expensive than convection;
• It is difficult to integrate intelligent settings into the device.

It cannot be said that convection wall heaters are inferior to infrared heaters in all respects. But they have lower efficiency. Even within a group, the effectiveness difference is significant. For example, for ceramic models it is 90%, for oil models it does not exceed 75%. But the service life is long - at least 50 years. Plus - the price is lower.

Convection wall heaters have one serious disadvantage - they dry out the air. The problem is solved by installing a humidifier. But these are additional costs.

Many devices are equipped with a fan that makes noise during operation. And this is also unpleasant. Another drawback is dust, which burns when it gets on an open heating element.In addition, the movement of air currents raises this same dust, which can also be considered a disadvantage.

Thermal curtains should be identified as a separate group. It is essentially a long heat fan that is installed above the front door. They are rarely used in dachas and private houses, especially in apartments.

They are mainly installed at the entrance to shops, cafes and other establishments of a similar type. The task of a wall heater is to cut off from the interior space the cold air that passes into the room from the street when the front door opens. The device can operate continuously or periodically, only when the door is opened.

Wall heaters offered in stores are in demand regardless of their belonging to any groups or categories. But you need to choose wisely, so the criteria for choosing a wall heater will be discussed below.

What to look for when choosing

Wall heaters, like all heating devices, are selected according to the same basic indicators.

And the main one is the power of thermal energy release. The standard ratio applies here. And in addition to power, there is a heated area. The ratio is that 10 m² requires 1 kW of heat.

For example, if the area of ​​the room where you plan to install a wall heater is 20 m², then a 2 kW device is required to heat it. But if for convection heaters this is the average value, then for infrared heaters it is the maximum. This calculation is applied if the wall heater will serve as the main heating.

The second selection criterion is size. The larger they are, the larger the heat transfer area, the more powerful the heater. In the model range you can find different dimensions, for example, long or tall.Selecting the size of the installation location is not a problem.

Some manufacturers increase the thickness so as not to change the other 2 parameters, but at the same time increase power. For wall heaters, thickness is a critical dimension. You need to approach its increase wisely.

The third criterion is the management system. There are two positions here - mechanical or electronic. The first models are simple and cheap, with a lot of disadvantages:

• functionality is limited;
• rapid wear during long-term use, which causes failure;
• large error when setting the temperature;
• a strong clicking sound when the thermostat automatically turns on or off.

Electronically controlled wall heaters have wider functionality. For example, setting for a long time of use, more accurate temperature setting.

The fourth criterion is the maximum heating temperature. It is indicated in the passport. But the presence of a thermostat in the heater makes this characteristic not the most important.

The fifth criterion is safety. In convection heaters it depends on the maximum temperature. In infrared, it depends only on the location, because it is impossible to direct streams of rays at a person.

Which wall heater is better?

Before choosing the best wall heater, you need to set priorities. If the main indicator is saving on electric current consumption, then you need to purchase infrared models.

If the heating device will be used as the main heat source, then convection is better oil heater.

If the task is to use the device additionally as an interior detail, then it is better to buy infrared film. Such models are produced in the form of paintings.

Top 10 wall heaters

It is difficult to say that one heater is better than another. Therefore, ratings are compiled that include electrical appliances that have been assessed by manufacturers, specialists and consumers. The reviews of the latter are important because it is ordinary people who test wall-mounted heaters, buying them and installing them in their homes. Next is the TOP 10 or an overview of the top ten.

Ballu BIH-AP4-1.0

Infrared wall heater with a power of 1 kW, which can heat a room of 10 m². Available in 3 colors: white, black, gray. Can be installed not only on the wall, but also on the ceiling.

Dimensions:

• thickness – 4 cm;
• length – 1.19 m;
• width – 13 cm.

The device weighs 2.7 kg. Mechanical control. The panel is moisture-resistant, so it can be used in damp rooms.

Additional benefits:

• silent;
• energy saving;
• fast heating;
• acceptable price.

Disadvantages include a clicking sound when cooling, lack of wires included, and strong heating of the surface.

Hyundai H-HC7-20-UI291

Infrared wall heater, 2 kW from a well-known manufacturer. Installed to heat rooms with an area of ​​20 m². Moisture protection class – IP65. This is a high figure.

Dimensions: 680x110x72 mm. Weight – 1.8 kg. Suspend at a height of at least 1.8 m.

There are several disadvantages:

• wall heater is expensive;
• crackles during operation;
• bright indicator light.

Nikaten NT 200

One of the low-power infrared wall heaters. It's ceramic. Power is 200 W, so the heating area does not exceed 4 m².

The dimensions of the device are small:

• thickness – 4 cm;
• length – 60 cm;
• width – 30 cm.

Advantages:

• Efficiency 90%;
• resists voltage surges well without reducing operating efficiency;
• silent;
• economical - by 70% with a large number of models;
• guaranteed service life – 25 years.

Disadvantages:

• no temperature control relay;
• no protection against high humidity;
• one color – beige.

Ballu BIH-L-3.0

An infrared wall heater in which the heating element is a quartz lamp. Power is 3 kW, which will provide heat to an area of ​​up to 30 m². And other technical characteristics:

1. Dimensions: 940x180x90 mm.
2. Weight – 4.1 kg.
3. Mechanical type of control.
4. Mechanical thermostat.
5. Dust and moisture protection – IP24.

The big disadvantage of a wall heater is that there is no tip-over protection.

Electrolux ECH/R-1500 T

This is a convector type wall heater with a power of 1.5 kW, providing heat to an area of ​​up to 20 m².

Dimensions: 560x400x91 mm. Weighs 3.2 kg. Control type: mechanical and electronic – selected at your discretion.

Pros:

• high efficiency of energy consumption;
• presence of a convector;
• there is protection from moisture and overheating;
• heating element – ​​ceramic monolithic plate.

Minuses:

• connection cord is short;
• There are no mounting brackets included.

Noirot Spot E-5 Plus 1500

This is both a floor and wall model. The kit includes a wall bracket. There are no legs - you will have to buy them separately.

Main characteristics:

1. Power – 1.5 kW.
2. Heating area – 20 m².
3. Electronic control.
4. Four operating modes.
5. Screen with temperature settings.
6. Dimensions: 580x440x80 mm.
7. Weight 4.7 kg.
8. Presence of overheating and freezing modes.

Flaws:

• high price;
• The surface of the panel becomes very hot.

LVI Yali 05 080 21 230 13 1

Double-row wall-mounted oil heater with a power of 1.25 kW. Dimensions: 800x500x105 mm. The Swedish manufacturer provides a 10-year guarantee that the device will work without problems.

Pros:

• steel body, increased structural strength;
• powder paint;
• The kit includes wall brackets;
• frost protection;
• there is an energy saving mode;
• electronic temperature control;
• automatic shutdown.

Minuses:

• plug missing;
• The heater is too thick, it's noticeable.

LVI Kaba 05 140 10 230 10 1

This is a standard wall-mounted oil heater with a power of 1 kW. If you buy additional legs, you can use it as a floor model. Color – white, powder paint. Steel body. Warranty – 10 years.

Dimensions: 1450x520x50 mm. A thin heater that fits into the interior.

Advantages:

• low noise level;
• rollover protection;
• frost protection;
• presence of an indicator.

Flaws:

• high price;
• there is no protection against moisture.

TeplEco 0.4 kW

This is a quartz wall heater. White relief panel 25 mm thick. This is enough to keep the device cool for a long time. Length 600 mm, width 350 mm. Heats up quite quickly - in 20 minutes. The maximum heating temperature is +95 degrees. Warranty – 5 years.

Two disadvantages:

1. The heater weighs 12 kg. Therefore, it can only be mounted on walls with high load-bearing capacity.
2. The quartz panel is not the most durable. May break under impact loads.

WARMTH OF THE CRIMEA EO 448/2 STONE FIREPLACE

One of the film type wall heaters featuring a stone fireplace. Images may be different, which makes it easier to match the interior of the room.

Heater power – 400 W.The device is used as an additional heat source to assist the main heating system. Dimensions: 1000x600x1 mm. The thickness and weight of the heater are so small that the device can be hung on walls with even the smallest load-bearing capacity. For example, on drywall by screwing a self-tapping screw into it.

Surface temperature +65 degrees. This is maximum. The panel heats up in 3 minutes. It is safe to touch the film.

The only downside is that the warranty is only 1 year.

Except electric wall heaters You can also buy gas analogues in stores. It cannot be said that the latter are several times more economical than the former. Electrical appliances are simply universal, hence their popularity. To install them, you only need a socket. If the power exceeds 2-2.5 kW, then you need to extend a separate circuit to the distribution panel with the installation of a separate machine and RCD.

WITH gas difficult. This is not only wiring a gas pipe using gas welding. This is laying a chimney, obtaining permission to install the unit. Creating a project that you have to pay for. Annual maintenance and visits to gas service representatives who will draw up reports.

When it comes to electric wall heaters, choosing the best one is not that difficult. The main thing is to choose the right power. The second is to decide what type of heating the heating device will be: main or additional. Further - at your discretion: sizes, color, functionality, protection, etc.

Dear readers, many of you have probably already purchased a wall heater. After all, outside the city, in dachas or cottages, many organize heating taking into account the lack of gas.This means that electric heating devices are purchased first of all, where wall-mounted analogues today have no competition. This is stated by statistics.

Share your experience - how did you choose a specific model? Write in the comments. Save the article to bookmarks so as not to lose your rating of devices.