TOP 12 centrifugal pumps for wells: rating of the best + recommendations for choosing equipment
For an uninterrupted supply of clean and high-quality water to a private home, you need, in addition to the well itself, a pump.Universal centrifugal pumps for wells are unpretentious in maintenance, but it is important to carry out routine cleaning. They also work quietly and do not destroy the walls of the well. How to choose a suitable unit?
We invite you to familiarize yourself with the best centrifugal models, pay attention to their characteristics, and find out their advantages and disadvantages. For clarity, we classified the units according to the level of maximum pressure. The recommendations given in the article will help you purchase a reliable and practical pump.
The content of the article:
Rating of centrifugal pumps
Models with pressure up to 60 m
UNIPUMP ECO 2
Optimal cost/performance ratio
The body is made of stainless steel and has a single-phase electric motor. The control unit is built into the device itself, and the “floating” durable wheels are made of polycarbonate. To prevent the pump from failing prematurely, it must be cleaned at least once every three months.
Technical features:
- throughput - 4.8 cubic meters. m/hour;
- pressure (maximum) - 60 m;
- power - 750 W;
- weight - 17 kg;
- additionally - protection against overheating, the amount of mechanical impurities in the water should not exceed 100 g per cubic meter.
The undeniable advantage of the pump is its high performance and build quality. Some users consider the fact that some parts are made of cast iron to be a significant drawback.
The pump is suitable for a country house or cottage; it can be used by a family of 4-5 people. The depth of water intake is 20 meters.
- High productivity - 80 l/min
- Smooth engine start
- overheat protection
- Economical energy consumption
- Maintenance of several water intake points
- Single stage suction system
- Demanding quality of pumped water
- There is no plug on the electrical cable - you need to buy it separately
Aquarius BCPE 0.5-32U (820 W)
Reliable and practical pump - an excellent solution for wells with a diameter of 110 mm or more
The pump from the famous Ukrainian manufacturer Promelektro received many positive reviews from customers. The model demonstrates good performance, ease of use and durability.
Thanks to its high efficiency and reliable motor, the pump consumes energy economically. Aquarius BTsPE 0.5-32U is supplied with a cable and a long cable with a connected starting unit.
Technical features:
- throughput – 3.6 cubic meters. m/hour;
- pressure (maximum) - 47 m;
- power - 820 W;
- weight – 11.7 kg;
- additionally - overheating protection, capacitor unit, soft engine start, five-stage suction system.
The pump is designed to pump water with temperatures up to 35°C with an impurity content of 1500 g/cubic meter. m.
In most cases, the cable is long enough to install and connect the pump, so you don’t have to do anything electrically yourself. The estimated working life of Aquarius is 6 thousand hours, which corresponds to approximately 6-8 years of year-round operation in a private home.
- Cable with capacitor block
- Smooth engine start
- overheat protection
- Multi-stage suction system
- Permission to pump water with impurities
- No check valve
- Dependence of pressure on network voltage
Aquarius BCPE 0.5-25U
Four-stage low-pressure pump - option for shallow wells
The body is made of stainless steel, and the wheels are made of plastic. The pump plug has a special contact for grounding. The device can be used for pumping well water (pure or with admixtures of sand or clay). If the water temperature drops below zero, the pump will not be able to pump it.
Technical features:
- throughput - 3.6 cubic meters. m/hour;
- pressure (maximum) - 36 m;
- power - 690 W;
- weight - 10.2 kg;
- Additionally, a smooth engine start and overheating protection are provided.
Users note good value for money. The disadvantage is that the lower part of the pump quickly becomes clogged due to particles of clay and sand getting into it. Some owners say that a relative disadvantage is that the device requires scheduled annual cleaning.
This pump model is suitable for pumping water from a depth of up to 25 meters. The declared capacity covers the water needs of a family of 3-4 people.
This manufacturer has several pump models, which also took their place in our rating. But the process of installing and connecting them is similar, only the characteristics differ. We recommend that you read detailed instructions on the correct connection of the Aquarius pump.
- Acceptable cost
- Economical energy consumption
- overheat protection
- Smooth engine start
- Remote condenser box
- The pump part becomes clogged with sand
- Low head - 36 m
Models with pressure from 65 to 75 m
Aquarius BCPE 0.5-50U
A popular unit is a submersible 8-stage electric pump with a thermal relay and a starter
Another representative of the Kharkov plant "Promelektro" - a pump with a capacity of 3.6 m3/h allows you to solve various problems of water supply for a suburban area, private house and cottage. The model is used to supply water in irrigation systems and car washes.
Aquarius BTsPE 0.5-50U is acceptable for use in wells with a minimum diameter of 110 mm and wells. The pump copes with pumping water from tanks, artificial reservoirs and ponds.
Technical features:
- throughput - 3.6 cubic meters. m/hour;
- pressure (maximum) - 75 m;
- power - 1140 W;
- weight - 16.3 kg;
- additionally - overheating protection, capacitor unit, soft engine start, 8-stage suction system.
The unit operates stably without making loud noise. Most reviews about Aquarius BTsPE 0.5-50U are positive, the reliability of the pump is confirmed by the duration of its use. Experienced users advise monitoring the immersion level of the pump, and also replacing the submersible nylon cable, which is supplied in the kit, with a more wear-resistant metal one.
- Long cable - 50 m
- overheat protection
- Smooth engine start
- Multi-stage suction system
- Starting device provided
- High power consumption
- The pump part becomes clogged with sand
- Complaints about the quality of the safety rope
GILEX Water cannon PROF 40/75
The solution for low-yield wells is a pump with low sensitivity to pollution
The PROF 40/75 water cannon has gained a reputation as a reliable, practical and unpretentious unit. The device body, screw and impellers are made of stainless steel. The pump is designed for installation in deep wells with low flow rate. However, the manufacturer specifies that the water flow through the Vodomet PROF 40/75 must be at least 10 l/min.
The pump is capable of operating stably with partial immersion of 10-15 cm. A special feature of the unit is the ability to work in sandy wells. The permissible amount of sand in water is no more than 2 kg/m3.
Technical features:
- throughput - 2.4 cubic meters. m/hour;
- pressure (maximum) - 75 m;
- power - 670 W;
- weight - 10.9 kg;
- additionally - motor thermal relay, built-in capacitor, mesh for filtering large debris.
The pump operates quite quietly. If the network voltage is unstable, the manufacturer recommends connecting the device through a stabilizer.
The Vodomet PROF 40/75 pump is suitable for organizing water supply in a private house with 2-3 water intake points. The productivity is enough to water vegetable beds and gardens.
- Low sensitivity to dirt
- Ability to work with partial immersion in water
- overheat protection
- Built-in capacitor
- Quiet operation
- Single stage suction system
- No dry running protection
Pedrollo 4BLOCKm 2/10
Multistage electric pump from an Italian brand - high-quality assembly, thermal protection and two-year warranty
The Italian-made model is assembled from high-quality anti-corrosion materials. The unit body is stainless steel, the check valve and impellers are technopolymer. The Pedrollo 4BLOCKm 2/10 pump complies with international standards for pumping drinking water.
The device operates from a single-phase network and is supplied with a waterproof cable 20 m long. The manufacturer recommends no more than 20 starts per hour.
Technical features:
- throughput - 3.6 cubic meters. m/hour;
- pressure (maximum) - 65 m;
- power - 550 W;
- weight - 10.2 kg;
- additionally - overheating protection, soft motor start, built-in capacitor.
The pump can be installed vertically or horizontally. Pedrollo 4BLOCKm 2/10 is designed for pumping clean water, the sand content of which does not exceed 150 g/m3.
The model from the Pedrollo company is not particularly in demand among buyers due to the high price tag.You will have to pay about 28-29 thousand rubles for the pump.
- Motor with capacitor and thermal protection
- Multi-stage suction system
- Low noise level
- Economical electricity consumption
- Smooth engine start
- High price
- Difficult to find spare parts
- Demanding requirements for the composition of pumped water
Models with pressure from 77 to 90 m
BELAMOS TF3-80
A crowd favorite - pump with multi-stage suction system, thermal protection and check valve
The device body is made of high quality stainless steel. To prevent the pump from failing early, do not forget to regularly clean the filter from sand.
Technical features:
- productivity - 2.7 cubic meters. m/hour;
- pressure (maximum) - 85 m;
- power - 1000 W;
- weight - 16 kg;
- additionally - a thermal relay is provided to protect against overheating, a multi-stage suction system.
To improve protection even in the cold season, it is necessary to install a special sensor against dry cold, since it is not included in the kit.
Suitable for a cottage or summer house. The maximum immersion depth is 80 m, the internal diameter of the well is from 80 mm. The pump can be used in open reservoirs if the sand content in the water does not exceed 180 g/m³.
- overheat protection
- Built-in check valve
- Multi-stage suction system
- Warranty - 2 years
- Easy to install and dismantle the pump
- No dry running protection
- Complaints about the quality of the network cable
- Sensitivity to mechanical impurities
GILEKS Water cannon PROF 55/90 House
Autonomous water supply system - electric pump with hydraulic accumulator and control panel
The pump comes with all the necessary parts so that the user can install it themselves. A hydraulic tank, control panel, and necessary shut-off valves are provided.
Technical features:
- productivity - 3.3 cubic meters. m/hour;
- pressure (maximum) - 90 m;
- power - 1200 W;
- weight - 24.5 kg;
- Additionally, there is protection from dry cold and overheating, there is a hydraulic accumulator (50 liter tank), the necessary shut-off valves and a control panel.
The pump is suitable for pumping clean water for a country house or cottage. It can be installed in wells or wells, loading it under the water surface no more than 30 m.
The model is often chosen by summer residents; there are no difficulties connecting an autonomous water supply system. However, there are a few complaints about the build quality - the possibility of defective boards and receiver leaks.
- Extended equipment
- Soft start system
- Protection against dry running and overheating
- Possibility of operation with partial immersion in water
- Built-in capacitor
- Significant energy consumption
- Complaints about the quality of the receiver
- Small volume of hydraulic accumulator - 50 l
Aquario ASP 1.5C-60-75
Model of the Italian brand - good build quality and practicality of operation
The body is made of stainless steel, the head is made of brass, and the wheels are made of durable technopolymer. Owners of such a pump should remember to schedule cleanings every few months.
The Aquario ASP 1.5C-60-75 unit is equipped with a long cable and a remote starting unit. The body diameter is 75 mm, so the pump can be installed in narrow wells with a width of 80 mm.
Technical features:
- productivity - 3 cubic meters. m/hour;
- pressure (maximum) - 77 m;
- power - 920 W;
- weight - 11 kg;
- additionally - protection against overheating, portable protective starting unit, sand content in water should not exceed 120 g/m³.
Reviews of the Aquario ASP 1.5C-60-75 are mostly positive. Many buyers noted the good quality of the assembly, the small diameter of the pump, and the ease of installation.
A productivity of 50 l/min is enough for the domestic needs of a family of 3-4 people and watering a personal plot.
- Housing corrosion resistance
- There is a check valve
- Low noise characteristics
- overheat protection
- Remote starting block
- Single stage suction system
- Sensitivity to pumped water quality
- Significant dimensions, height - 111 cm
Models with pressure from 100 m
BELAMOS TF3-150
Pump with maximum pressure - option for supplying clean water from a deep well
The TF3 product line pump with a maximum head of 150 m is suitable for deep wells with a diameter of 80 mm. The model has a built-in check valve, a floating impeller, and a single-phase oil-cooled electric motor. The unit is equipped with a three-core cable with double insulation, as well as a grounding plug.
Technical features:
- throughput - 2.7 cubic meters. m/hour;
- pressure (maximum) - 150 m;
- power - 1600 W;
- weight - 27.5 kg;
- additionally - overheating protection, built-in check valve, multi-stage suction system.
The BELAMOS TF3-150 pump received high ratings from users. Buyers consider the cost of 17 thousand rubles acceptable for equipment with such performance characteristics. The pump is easy to install and maintain, and operates quite quietly.
The manufacturer is confident in the quality of its product and provides a two-year warranty for BELAMOS TF3-150, subject to compliance with operating rules. The sand content should be within 180 g/m³.
- High pressure level - up to 150 m
- Built-in check valve
- Multi-stage suction system
- Warranty - 24 months
- Stable operation during voltage surges
- No dry running protection
- Significant energy consumption
Grundfos SQ 3-105
Premium unit - maximum performance and comprehensive protection system
The German-assembled pump Grundfos SQ 3-105 demonstrates high efficiency, high-quality assembly and multi-level protection. The unit with a multi-stage suction system pumps up to 70 liters of water per minute. Requirements for liquid quality: temperature up to +35°C, content of mechanical impurities – no more than 50 g/m3.
The model implements protection against dry running, reverse axial displacement, and power surges in the network. The engine is protected from overheating and the fluid level is monitored. Vertical and horizontal installation of the Grundfos SQ 3-105 unit is acceptable.
Technical features:
- throughput - 4.2 cubic meters. m/hour;
- pressure (maximum) - 147 m;
- power - 1600 W;
- weight - 6.5 kg;
- additionally - protection against overheating, dry running, smooth engine start, multi-stage suction system, electronic control, check valve.
The model has been on the market for several years. During this time, the unit has proven itself to be a reliable and efficient device. The characteristics declared by the manufacturer are true. The warranty for Grundfos SQ 3-105 is 2 years.
The pump is very narrow (74 mm), so it can be installed in wells with a diameter of 76 mm.
- High productivity - 70 l/min
- Overheating and dry running protection
- Built-in check valve
- Surge protection
- Multi-stage suction system
- High price
- Short cable included
- Sensitivity to pollution
- Significant energy consumption
Aquarius BCPE 0.5-80U
High-performance pump from a reliable brand - balance of quality and price tag
High pressure is possible thanks to a multi-stage pump part and a powerful single-phase motor. Suitable for both a summer house and a country house. It can be installed in wells and boreholes, immersion depth is 30 meters.
Technical features:
- productivity - 3.6 cubic meters. m/hour;
- pressure (maximum) - 120 m;
- power - 1600 W;
- weight - 19 kg;
- additionally - thermal relay, 14-stage suction system, condenser box, power cord - 80 m.
The electric motor is located behind the pumping part, which prevents oil from getting into the supplied water.
Consumers appreciated the build quality and performance of the unit. During operation, the pressure does not drop. Some buyers did not like the quality of the safety rope; instead, they recommend using a metal cable to immerse the pump.
- High productivity - 60 l/min
- Remote condenser box
- Permission to pump water with impurities
- Engine overheat protection
- Automatic restart when the thermal relay is activated
- No check valve
- Low quality pump immersion rope
- No dry running protection
What to look for when choosing a pump?
Before making your final choice, you should pay attention to several key technical characteristics of pumping equipment.
One of these characteristics is performance. It is measured in l/min or cubic meters. m/hour and means the volume of water pumped per minute or hour. For a family of 2-3 people, this figure should reach 45 l/min or 2.5 cubic meters. m/hour minimum.
This indicator can be calculated independently. Sum up the water consumption of all intake points (consumers) in the house and multiply by a factor of 0.6. The number 0.6 means that no more than 60% of all water intake points are used at the same time.
Maximum head – this is an important indicator. The pressure depends on whether the pump will pump enough water for your needs. To calculate it, it is necessary to sum up the dynamic and static water levels. Then add 10% of the amount received.
There are more complex formulas that take into account the distance to the house and the number of water intake points. If you do not want to carry out complex calculations yourself, then seek advice from a specialist.
Statistical water level or the depth to the mirror is the distance between the actual water level and the top point of the well. If this distance does not exceed 10 meters, then a surface pump should be selected.
Some experts believe that this indicator should be within 2-7 meters. In other cases, focus on submersible. Note that the latter is more durable, almost silent, and also powerful.
Also important water column height or dynamic level is the distance from the water's edge to the bottom of the well. It is necessary to take into account the depth of the well or borehole, since this parameter is also specified in the passport for the pump. These indicators, ideally, should coincide. It is worth taking into account the height of the pump itself in relation to the well.
Equipment power is fixed in W and means how much electricity the pump will “pull”. Do not purchase a pump with a power reserve, otherwise you will simply overpay for electricity.
Pay attention to the material of the case, it must be protected against corrosion. The details are also important. Check, at least visually, the build quality and wheels. It is best if they are “floating” and made of durable technical plastic.
The key working tool of a centrifugal hydraulic pump is wheel. Most often it is made from an alloy of non-ferrous metals, stainless steel or cast iron.
We have provided more tips on choosing the appropriate pump model for a well in next article.
The wheel is driven by an electric motor. Centrifugal force forces water to the edge of the wheel away from its center. Thus, a high-pressure zone is formed and the liquid flows through pipes to water intake points (kitchen, bath, irrigation). Then the pressure decreases and the process begins again.
Some centrifugal pumps have hydraulic accumulator. This is a tank with a membrane element.It is used to maintain the required pressure in the pipes through which water, using a pump, flows from the well and into the house. It is indispensable for wells and wells with a depth of 10 to 30 meters.
Another important element is considered check valve. The principle of its operation is that water does not have the opportunity to move in the opposite direction, that is, from the house through the pipes to the well.
It is also worth considering what kind of water the pump can pump. If the water in the well contains impurities of lime, clay or sand, then this must be disclosed before purchasing. Otherwise, the pump will clog and fail prematurely.
Before purchasing, find out the location of service centers and the availability of parts (at least key ones) for the selected pump model.
If you want to install the pump yourself, then be sure to carefully read the instructions for the device and consult with specialists.
Considering these characteristics, you can easily select the appropriate pump model.
Conclusions and useful video on the topic
Video tips from professionals will help you cope with the calculations and make the right choice.
The author explains in detail how to choose a suitable well pump. You will also learn how to make correct calculations of important technical indicators of equipment:
From the video you will learn how a pump with a centrifugal mechanism works and how to choose the best option for specific living conditions:
Finding a good well pump with a centrifugal mechanism is not difficult. First of all, use our advice and do the calculations. Then, consult with experts and make your final choice.
Are you thinking about purchasing a pump for your well, but have doubts about the quality of the model you like? Ask for advice from our experts and other site visitors in the comments block below.
Or maybe you use one of the pumps presented in our rating? Are you happy with it? Share your impressions of the model - potential buyers will thank you.
We installed a pump at the dacha about a year ago. We go there quite often, but we can’t go anywhere without water. We were then recommended to take Belamos TF3-40, it is in the rating here. Well, it’s a pretty decent pump, it really works, you can’t even hear it, and there haven’t been any problems. Yes, I look for it often, but I would clean any other pump just as often in order to last as long as possible.
I have “Aquarius BTsPE 0.5-80U” in my house; when I bought it, I didn’t even know that it was so good. I chose it because the depth of my well is large, there is little water and the flow rate of the well is small. The pump is simple in design, easy to install in a well, yes, it is heavy, but it doesn’t really need to be maintained. It’s a little expensive, but it’s worth it, it’s been working flawlessly for years, I only remember about it when the neighbors complain about their pumps that have stopped working.
Everyone also praised the Aquarius BCPE pumps, but in reality my impressions of it were negative. I bought a pump “Aquarius 60/150” for a freshly drilled well of 82 meters, connected it - muddy water came out, the pressure was normal. I left it for pumping and it worked for a day. The next morning I left for work, at lunchtime my wife called - the pump had stopped pumping.I arrive in the evening, turn on the pump, it runs for 15 minutes and turns off again, and so on several times. I took it to the service center - the hydraulic part was worn out, the thermal protection was triggered. The pump worked for a day. I won’t even contact our pumps anymore.