Review of the split system Ballu BSLI 12HN1: an excellent solution for a typical one-room apartment

The Russian-Chinese company Ballu specializes in the development and production of climate control equipment.The brand's product range includes a wide selection of household air conditioners at a relatively affordable price. Among them is the Ballu BSLI 12HN1 split system for 35 sq. m.

What is remarkable about the household split system of the Chinese brand? What are its strengths and weaknesses? Expert assessment will help answer these questions.

Before deciding to purchase, you should study the technical parameters of the unit, compare them with operating conditions and personal preferences. A comparison with similar models will complement the review of the Ballu BSLI 12HN1 split.

Design and characteristics of the model

Ballu supplies the market with mobile appliances, multi-complexes, column and conventional split systems. Among household appliances, they have gained particular popularity inverter units. This is exactly what the BSLI 12HN1 model belongs to.

Design features of the air conditioner

The split system is characterized by a traditional design. The delivery set consists of two modules, a control panel and instructions. The indoor unit is made in a minimalist style and will fit perfectly into any interior.

The main operating components of the unit: fan, evaporator, air intake and air outlet grilles, air filter, temperature sensor

There is an informative display on the front cover. The control panel shows the operating parameters of the air conditioner and the state of the microclimate in the room.

The block displays:

• air temperature;
• start indicator;
• timer operation;
• activation of night mode;
• compressor operation.

The signal receiver from the remote control is also located here.

The outdoor unit of the split contains the “heart” of the system - the compressor, which is responsible for compression and circulation of the refrigerant. The heat exchanger and fan are also located here.

Ballu BSLI 12HN1 belongs to the ECO Edge DC-Inverter line of inverter climate control equipment. The outdoor module of such split systems is additionally equipped with an electronic power board that regulates the operation of the device.

The control unit of the inverter unit is aimed at changing the normal network frequency, adjusting the speed of the compressor engine and its performance.

This principle of operation “evens out” the operation of the air conditioner and does not bring the unit to peak loads. When the desired temperature is reached, the split does not stop cooling, but only reduces productivity

Inverter technology reduces energy consumption, lowers noise levels, and minimizes peak loads, which are undesirable both for the equipment itself and for the power grid.

Technical and operational parameters

The model is designed to serve premises of 32-35 square meters. m., BTU split system Ballu BSLI 12HN1 is 11.5, which corresponds to a cooling capacity of 3200 W. The air conditioner works in two directions - cooling and heating the house.

In addition to power characteristics, it is worth noting other operating parameters:

• maximum air flow – 9.67 cum. m/min;
• energy consumption – class A;
• dust and moisture protection – class IPX4;
• average power consumption – 0.99 kW;
• error in setting the temperature – no more than 1 °C;
• the length of the highway is 15 m, the height difference between the modules is 5 m;
• sound pressure in the house – 26 dB, outdoors – 52 dB;
• the minimum permissible operating temperature for the outdoor module is -10 °C;
• weight of the external/internal unit is 24.2 kg/7.9 kg, respectively.

Module requires horizontal installation, connection to 220 V network. Wireless air conditioner control.

The remote control has built-in sensors. Thanks to them, “smart” technology tracks the location of a person and adjusts the temperature near the user

The remote control transmits a signal about microclimate parameters every three minutes. If the notification is interrupted, the split system begins to focus on the sensors built into the internal module.

The air conditioner is equipped with a High Density air filter that cleans outgoing air flows from chemical odors, bacteria, harmful substances, and animal hair.

Operating modes and additional functionality

The manufacturer has included a good set of options in the Ballu BSLI 12HN1. Basic operating modes of the unit:

• heating – setting temperature parameters manually, maximum value – 32 °C;
• cooling – the limit value is 18 °C;
• dehumidification – the split system absorbs moisture from the air, converts it into condensate and discharges it to the street, while the temperature in the house decreases.

The air conditioner has an automatic mode. The unit independently adjusts the microclimate without human intervention.

For example, if the temperature in the apartment is above 26°C, the air conditioner will automatically cool the air to 22-23°C. In the cold season – it will warm the house up to 22°C

For more comfortable use of the equipment, the following functionality is provided:

1. The air conditioner starts working intensively and cools the room to 18 °C in a matter of minutes. This mode is characterized by maximum power consumption and increased noise.
2. The mode is designed for comfortable sleep. Noise is reduced as much as possible, fan rotation intensity and electricity consumption are reduced.
3. Maintaining a set temperature near the user. It is assumed that the remote control is located next to the person.
4. Timer. You can select the time when the device turns on or off. The range of values ​​is within 24 hours.
5. Climate control. The device maintains the set temperature. If necessary, the split system itself switches between cooling and heating.

BSLI 12HN1 has automatic restart. In the event of a power outage, the unit saves the previously entered settings and resumes operation after the power supply is restored.

The user can select the position of the damper. There is also a Swing option - swinging horizontal blinds to evenly distribute air flow throughout the room

The BSLI 12HN1 model includes several more practical functions that make servicing the unit easier. Among them:

1. Self-cleaning. After turning off the split, the blinds on the indoor unit close, but the fan runs for another 10 minutes, drying the heat exchanger.
2. Defrosting. The function helps to promptly get rid of snow and ice crust on the outdoor module. The installation activates internal heating and quickly eliminates the problem. Timely defrosting increases the stability of the split.
3. Self-diagnosis. If failures occur, the system determines the nature of the failure and displays a corresponding signal on the display.

The unit belongs to the middle price segment of air conditioners, but is equipped with all useful options and practical modes.

Strengths and weaknesses of the device

Significant advantages of split are due to inverter technology. BSLI 12HN1 features smooth power control, precise temperature control and economical energy consumption.

Thanks to the design of the compressor, the use of high-quality materials and the special configuration of the air turbine, it was possible to achieve quiet operation. In night mode, the unit operates almost silently.

The internal module is made of high quality plastic, resistant to UV rays. The surface of the block does not attract dust, retains its white color and is easy to clean

The advantages of the unit include:

• modern design;
• the possibility of drainage from two sides - the air conditioner can be installed in different places;
• protection of electronics and compressor from voltage failures;
• The anti-corrosion coating protects the heat exchanger - the service life of the working element is tripled.

The ECO Edge DC-Inverter line uses R410A freon. The refrigerant is recognized as more efficient and ozone-safe.

Among the technical shortcomings, we can note the lack of some functions. There is no ventilation mode, no “smart eye” option for detecting the presence of people in the room, control via Wi-Fi and illumination of buttons on the remote control.

User reviews about the split system

Most buyers appreciated the BSLI 12HN1 model. The unit is praised for its versatility and compliance of operating parameters with the stated characteristics.

The air conditioner's power is enough for a room of 30-34 square meters. m, or two small adjacent rooms with open doors

This module is suitable for a standard one-room apartment.For spacious rooms facing the sunny side, it is better to choose a more powerful unit.

Disadvantages identified by users:

• there is noise from the street block - it is better to place the module on vibration-damping supports;
• short power cable – 1.5 m;
• The noise of the internal module is noticeable when the compressor starts up.

Some consumers note a lack of air ionization options and insufficiently informative instructions.

Owners of split systems will definitely have to deal with cleaning them. Read about how to perform this procedure yourself. Further.

Comparison with similar units

When deciding to purchase equipment, it is advisable to compare the parameters of the selected sample with its closest competitors. For evaluation, we will take air conditioners from other companies with similar performance and approximate prices.

Competitor 1 – LG P12EP

Household split system from a South Korean brand, designed for a room up to 35 square meters. m. Technical characteristics are practically no different from the Ballu model. The advantages of the LG unit include the most quiet operation (19 dB indoor unit), double filtration of the air flow.

However, P12EP cannot be used for heating in temperatures above -5°C, while the Ballu limit is -10°C.

Users note good cooling performance, but the noise effect indicated by the manufacturer is questionable.

Competitor 2 – Sacata SIE-35SGC/SOE-35VGC

Wall-mounted household inverter-type air conditioner. The recommended range is up to 35 square meters. m. The split system generates an air flow of 8.67 cubic meters. m/min, power indicator is 3.5-3.8 kW depending on the operating mode.

When compared with Ballu, the split from Sacata is the leader in the following parameters:

• there is an anion generation function;
• permissible line length – 25 m;
• Operation of the device is possible at temperatures down to -15°C.

Sacata SIE-35SGC costs a little more than the Ballu air conditioner. The model is very popular among consumers, as evidenced by many positive reviews. The unit is considered one of the best in its price segment.

Competitor 3 – Aeronik ASI/ASO-12IL3

A highly technical offer at a relatively affordable price. The air conditioner's performance is enough to service 35 square meters. m.

At the same time, the unit from Aeronik has a number of competitive advantages:

• energy efficiency – class A+;
• length of communications – 20 m;
• the presence of a motion sensor to detect the presence of people and automatically adjust the operating mode;
• the minimum permissible operating temperature reaches -15 °C;
• possibility of remote control of the split via Wi-Fi.

In other parameters and functionality, the Aeronik air conditioner is not inferior to Ballu. Reviews confirm its performance, practicality, and ease of use.

Conclusions and best offers on the market

Among inverter split systems serving rooms of 32-35 sq. m, the BSLI 12HN1 unit is one of the most affordable. Its performance corresponds to the stated characteristics, and the set of options is enough for comfortable use.

If you want to slightly expand the functionality, you can choose a more expensive model. Among the worthy and budget offers are devices from Sacata and Aeronik.

Are you looking for an inexpensive inverter split system for your home? Or do you have experience using the Ballu BSLI 12HN1 air conditioner? Share it with visitors to our site, tell us if you are satisfied with the performance of the device? Leave your comments and ask questions in the block below.