Electronic bidet covers: selection tips and review of the best manufacturers

Multifunctional electronic bidet covers are considered luxury plumbing fixtures. In terms of comfort, no other plumbing fixture can compare with this device.They are designed for hygiene procedures after visiting the toilet and can completely replace a traditional bidet.

This option looks very attractive, especially for compact bathrooms, where placing both a toilet and a bidet is problematic, don’t you agree?

We suggest you understand the device, operating principle, advantages and disadvantages of the miracle lid. To help you with your choice, we have prepared a review of the best toilet accessories, and detailed instructions will be useful for those who decide to install the lid themselves.

Electronic bidet cover device

Structurally, the electronic bidet lid is simple and consists of 2 main parts: a seat and a lid that covers the toilet. The main difference between a useful and convenient device is the presence of a control panel. The designers placed it on the side.

Water is supplied through a pull-out tap built into the seat. You can activate it by pressing a button on the remote control. For drying there is a special nozzle that supplies heated air.

On average, the remote control can have up to 13 buttons. In addition to 2 washing buttons - quick and vibration and drying, it has the ability to activate a massage jet, regulate the temperature of the water, drying and the seat itself.

Equipped with a remote control and a special button for children, a deodorization button.You can turn on the energy-saving mode, adjust and clean the tip.

Each individual model of electronic bidet lid has its own set of functions. They are controlled using the buttons on the remote control (+)

Advantages and disadvantages of electronic cover

The main benefit of purchasing an electronic bidet cover is that all the amenities will be in one place. Its presence allows you to perform all hygiene procedures, eliminating from this process the transfer from one plumbing fixture to another.

The entire list of advantages consists of several points:

1. Space saving. The ability to turn a standard toilet into a 2-in-1 device - a toilet plus a bidet.
2. Versatility. The design of most toilets allows you to install the lid. It is used both for the home bathroom and in other places - sanatoriums, clinics, beauty salons, hotels.
3. Functionality. The presence of convenient additional options and several modes allows anyone to feel comfortable.
4. Hygiene. Using a bidet lid is an excellent prevention of infections and inflammations, because... All procedures are carried out using a contactless method. Some lids have an antibacterial coating.
5. Self-cleaning. Availability of automatic cleaning of washing nozzles.
6. Easy to installThanks to the detailed manual included with the device.
7. Availability of air purification function. In some models this is done using a fan mounted in the lid. In this case, the cover is connected to the ventilation shaft. In others, the problem is solved by the presence of a carbon filter, which prevents the formation of unpleasant odors.
8. Saving. It becomes unnecessary to purchase toilet paper.

It is possible to connect only to the cold water supply line. The design includes heating elements that heat the water before supply.

Despite all the obvious advantages, some are confused by the fact that the lid may not be suitable for an already installed toilet. This problem can be solved simply: before going to a plumbing salon, you need to take measurements.

The second significant disadvantage for many is the high cost of the bidet lid. Its price is really considerable - at least 500 USD, but our good health costs more?

Such a device is especially necessary in a home where one of the family members suffers from hemorrhoids. They will appreciate both a light massage and delicate cleansing.

Methods for determining bidet lid sizes

First, measure the distance between the centers of the fastening points. On modern toilets produced by companies Panasonic‚ Geberit‚ Roca it is adjustable from 0.8 to 1 cm.

You should also take measurements of the length of the toilet inside and the gap between the fasteners and the edge of the bowl. An important parameter is the distance between the edge of the toilet bowl and the flush tank.

Here it is important to take into account the size of the lid control unit.

Measurements to take before choosing a bidet cover. A - distance between bolts, B - internal length of the toilet, C - edge of the bowl - fasteners, D - edge of the toilet - flush tank

There is an easier way to select a lid - make a pattern out of cardboard, outlining the outline of the toilet. If toilet installed with non-standard geometry, a bidet cover can be ordered for it. When choosing a lid, in addition to the dimensions, it is important to take into account the geometry of the drain tank.

The cover in its rear part must exactly repeat it, otherwise correct installation is impossible.

Manufacturers of smart toilet lids

The leading manufacturers of electronic bidet covers are:

• Izumi‚ Panasonic‚ SATO‚ SensPa — Japan;
• Geberit - Switzerland;
• Yoyo‚ Nanobidet‚ L.S. Daewon - South Korea;
• Roca - Spain.

Basically, all caps produced by these companies have standardized sizes and are therefore suitable for different types of toilets.

Bidet covers SATO

These covers were created through the efforts of designers in Japan. They are very technologically advanced and modern. There are different models of these devices, differing in size. Factories producing the product are located in South Korea. They are equipped with the latest equipment, and product quality control is carried out by engineers from Japan.

The photo shows the lid of the SATO DB300 round bidet. This is the best-selling model in Russia. It goes on sale mainly in 2 sizes: S - short and M - round. The last option is the most common because has universal parameters

The design includes a combined type nozzle, storage water heater, adjustable seat heating. The functionality of the lid allows both general washing and the use of a bidet for women and children.

You can perform a massage, apply an enema by increasing the jet pressure, adjust the drying temperature, soften the water, change the position of the nozzle and perform other actions. The manufacturer provides a 5-year warranty.

Japanese brand Izumi

Bidet cover Izumi‚ installed instead of a standard toilet seat, it is more than just a bidet.

By pressing the corresponding button on the Izumi lid, the nozzle is activated, heated and cold water is mixed or the latter is simply heated, pressure and temperature are adjusted, the seat is heated, hydromassage is performed, drying, enema

This miracle of engineering, which has many functions, is powered by a 220 V outlet with a current frequency of 50-60 Hz. Consumes a maximum of 1347 W, for normal operation it is necessary to provide a pressure of about 0.75 Atm. The lid weighs 4.8 kg with dimensions 48.7 * 50.5 * 15.4 cm.

The creators of Izumi paid special attention to its safe operation. It is equipped with a switch that operates in case of current leakage, a fuse, and a thermal switch.

Models of the company's wall-hung and attached toilets are compatible with the Izumi bidet lid Roca‚ Laufen‚ Duravit‚ Vidima‚ Jacob Delafon‚ Vitra‚ Suntek‚ Keramin‚ IFO‚ SMARTsant‚ Villeroy&Boch‚ Della‚ GSI‚ Kerasan and some others.

Panasonic Universal Cover

Complete comfort and pleasant sensations when performing hygiene procedures can be felt with the Panasonic lid with enormous functionality. Its versatility lies in the fact that it is equally convenient for both sexes, as well as for children and even for the disabled.

Only environmentally friendly materials are used to produce the product.

The Panasonic electronic lid with bidet function brings comfort to the bathroom. It allows you to save energy. It has many operating modes and at the same time is compact and easy to use and maintain.

Panasonic lids are equipped with micro-lifts, so they close smoothly without creating any noise. Its weight is only 4.6 kg, and its overall dimensions are 47.7 * 52.9 * 18.2 cm. The warranty given by the manufacturer is 1 g.

YOYO covers from South Korea

Bidet covers QUOSS or YOYO comply with European standards. They have several massage modes, which can be customized taking into account the anatomical characteristics of a particular person. Low pressure in the water supply system compensates for the air pump built into the cover.

The photo shows a bidet lid set Lid QUOSS Q-7700. Two sizes are available: S - short, L - long

The new model is complemented by an aroma sachet, UV illumination, a water shut-off valve, and an extended hose.Instead of a water pump, an air pump is installed in it, which made it possible to increase the pressure to create an aerated stream. The designers also updated and improved the electronics. The warranty period established by the manufacturer is 2 years.

Electronic Rock Caps

This brand produces a huge number of models of bidet covers. A special place among them occupies Roca multiclin advance. It is characterized by great functionality.

Roca multiclin advance is equipped with a convenient LCD control panel. Compatible with Senso, Hall, Dama toilets, both wall-hung and floor-mounted

This is a removable seat with an antibacterial coating, equipped with heating and lighting. It closes softly and has, as an addition, mechanical control. Controls 5-level water pressure and 3-level air temperature. Suitable model for smart home systems.

Nanobidet bidet lid

In line Nanobidet Not long ago a new model appeared - MonteCarlo belonging to the Premium class. It is programmed to perform 47 functions.

Equipped with an instantaneous water heater, a built-in sensor that controls the lifting of the lid, night lighting, a remote control, a presence sensor, the “Bidet”, “Turbo”, “Children”, “Super Bidet” modes.

The MonteCarlo nanobid has convenient dimensions - 48.7 cm in width, 50.5 in length, 15.4 cm in height and weighs about 4.5 kg. Here you can adjust the nozzle extension. The filter purifies water using silver ions

The bidet lid is made of plastic Duroplast. It is designed specifically for the production of sanitary products and is characterized by high quality, impact and thermal resistance. It also has antibacterial properties and increased resistance to mechanical damage.

Geberit bidet cover

These lids fit most toilets that have an oval bowl. The product cannot be called cheap - the cost starts at around 600 euros, but if you take a high-quality free-standing bidet, the price is almost the same. But revenge will be saved - it will be possible to install there and connect the washing machine.

Cover Geberit AquaClean 5000plus. It consumes power 850 W. When the economy mode is turned on, consumption is reduced to 1 W, and when heating is running - to 6.7 W

The seat can withstand loads of up to 150 kg. The washing cycle with water heated to 37°C lasts about 20 seconds. The temperature can be adjusted from 10°C to 39°C. Water consumption is 0.08 l/s.

SensPa bidet lid

All components of the lid SensPa Made in Japan using high quality materials. Assembly is carried out in South Korea. There is a wide range of these products on the market with different size options.

Model UB-7035 is compatible with toilets with a length of 490 mm or more. When measuring, the cistern is taken as the starting point, and the outer front edge of the toilet basin is taken as the final point. For fastening on the toilet there must be holes with a center-to-center distance of 140 - 200 mm (+)

New for 2017 is the model SensPa JK750C class "Standard". It is equipped with a number of functions necessary for hygiene and comfort.

Available in 3 different forms. The kit includes a nozzle with an antibacterial coating. It has a total of 33 functions. Including seven hygiene functions and 10 comfort functions. Warranty - 2 years.

Installing the electronic bidet cover

After purchasing a bidet cover, you need to read the installation instructions that come with it. The manufacturer's recommendations will have to be followed exactly.

First, turn off the water, remove the old lid, put a new one on the toilet and install the faucet:

• connect to a ½ inch flexible hose;
• insert the assembly into the hole on the body;
• fasten the mixer using special studs and nuts, and placing rubber gaskets under the fasteners;
• check that the mixer is installed so evenly and finally fix it using sealant.

All that remains is to connect the nanocap to the power supply. They do this by directly plugging it into an outlet. The latter is installed behind the toilet so that it remains invisible. Wiring is carried out in cable channel.

An alternative option for a multifunctional lid is a toilet with a bidet function. This is a plumbing device with built-in nozzles for supplying water. More information about such innovative models is written in this article.

Conclusions and useful video on the topic

What is it and how does the bidet lid function:

The sequence of installing the bidet cover on the toilet:

By installing an innovative sanitary device, such as an electronic toilet lid, you can significantly improve the quality of personal hygiene procedures. When choosing a device, take into account its features and the dimensions of the existing toilet.

Do you have anything to add, or do you have any questions about choosing and installing electronic toilet covers? You can leave comments on the publication and participate in discussions. The contact form is located in the lower block.