Voltage stabilizers for Baxi gas boiler: TOP 12 best models according to consumers

The device is produced under the brand name of the reliable Russian manufacturer Bastion. Designed to work with indoor wall-mounted gas boilers, the power consumption of which does not exceed 222 VA. Withstands short-term overload up to 222 VA. Operates around the clock.

The relay type device is controlled by a microprocessor and does not introduce distortions during operation. The working components are enclosed in a durable white plastic case. Cooling occurs naturally; for this purpose, many ventilation holes are made in the walls of the case.

When an emergency occurs, it gives a light signal and performs a protective auto shutdown.

Specifications:

• phasing – single-phase;
• input voltage – 165-260 V;
• output voltage – 200-240 V;
• power – 222 VA;
• accuracy – 9%;
• cooling type – natural;
• dimensions (w/h/d) – 104/135/104 mm;
• weight – 1.5 kg.

Installation of the device is simple: it can be placed on the floor near the boiler or fixed on the wall in a convenient position using DIN- the rail located on the rear panel of the stabilizer. Fasteners are included. Recommended for use with gas boilers and other electrical equipment in private homes, apartments, and offices.

The stabilizer is produced under a Finnish brand, whose products are reliable and have a long service life. Designed to equalize the voltage of home appliances, including gas boilers. Protected from overloads and short circuits in the network. If operating parameters are violated, it de-energizes the load.

The relay type device has microprocessor control. The automatic fuse is combined with a switch for maximum protection. Equipped with a built-in surge protector for 2 CEE7/4 sockets.

The case is non-marking, black, made of plastic. Connection to the electrical network is made using a half-meter cable and a CEE7/7 standard plug. The indication on the top panel helps to control the operation of the device - LEDs “network”, “overload”, “stabilization”. The power off button is also located here.

Specifications:

• phasing – single-phase;
• input voltage – 184-285 V;
• output voltage – 198-253 V;
• power – 200 VA;
• accuracy – 14%;
• cooling type – natural;
• dimensions (w/h/d) – 106/118/112 mm;
• weight – 1.4 kg.

This is a floor-standing device, that is, it can be installed on a horizontal surface (floor, shelf, specially prepared base). Recommended for use in cottages connected to the gas main. In addition to the boiler, you can connect another device to it, but within the specified operating limits.

An automatic regulator with a reliable built-in filter is designed to protect home electrical devices from unstable voltage in the network. It has built-in autotransformer protection against maximum temperature surges and overloads. Like all technology Defender, is made in China, but has good reviews and recommendations.

Shutdown at critical parameters is triggered by an automatic fireproof fuse. The black plastic body resembles a grille - numerous holes are necessary for natural ventilation of the working elements.

On the top panel there are two sockets with grounding, a power button and an indication: “network”, “protection”, “stabilization”.

Specifications:

• phasing – single-phase;
• input voltage – 175-285 V;
• output voltage – 198-242 V;
• power – 200 VA;
• accuracy – 10%;
• cooling type – natural;
• dimensions (w/h/d) – 115/110/140 mm;
• weight – 1.17 kg.

The device is small and, compared to analogues, lightweight. It is installed on the floor next to connected appliances or an outlet. Used as a country option, suitable for servicing low-power gas boilers.It is allowed to connect two electrical appliances.

Inverter stabilizer series "InStab» designed for any home appliances, including medium-power gas equipment that is sensitive to voltage changes in the network. Available in three modifications, which differ in output voltage: 220/230/240 V. Electronic elements are protected from overheating, overload, impulse noise, and short circuit.

The structure is installed on the wall and connected via a 1.3 m long power cord with a 3-pole plug. For connection to the boiler there is a socket on the front panel. Here is an indication that allows you to control the operation of the equipment.

The cooling method is convection, without a fan, so the device operates quietly. The device has a 2-year warranty and CE certification.

Specifications:

• phasing – single-phase;
• input voltage – 90-310 V;
• output voltage – 216-224 V;
• power – 350 VA;
• accuracy – 2%;
• cooling type – natural;
• dimensions (w/h/d) – 155/245/85 mm;
• weight – 2 kg.

The compact, flat-shaped device can be easily installed on the wall; the kit includes a mounting bracket, dowel and screw. The power button is located on the side. The stabilizer is recommended for use in cottages, dachas, and office premises. Operates at 90% humidity (no condensation).

The relay type stabilizer is produced under the Italian brand in China. Serves to maintain stable, without surges, voltage in automatic mode. Provides safe power to electrical household appliances and units, including hot water and heating gas boilers. The functions are regulated by the operation of the microprocessor.

Like all similar devices, it is protected from short circuits and overheating. In the event of an accident auto shutdown. If the maximum voltage limit in the electrical network is exceeded, the device also turns off with a 6-second delay mode.

The electronics are housed in a black plastic rectangular case with holes for ventilation. On the front panel there is an indication, including a digital one, as well as an “input/output” display switch. On the side there is a fixed cord, a power button and one grounded socket.

Specifications:

• phasing – single-phase;
• input voltage – 140-270 V;
• output voltage – 202-238 V;
• power – 500 VA;
• accuracy – 8%;
• cooling type – natural;
• dimensions (w/h/d) – 330/160/60 mm;
• weight – 2.4 kg.

The device is designed for wall installation, which you can do yourself. Recommended for the protection of household appliances, compressors, ventilation systems, pumping stations, lighting and air conditioning. Has proven itself well in working with wall and floor-standing gas boilers in country houses, in conditions with unstable mains voltage.

The equipment manufacturer is registered in Hong Kong and produces inexpensive but high-quality products on the market. The stabilizer adjusts the voltage in the network, protecting household appliances from breakdowns and shutdowns. Regulates voltage drop or rise if power supply parameters do not correspond to operating conditions.

Installed internal protection against network interference, short circuits and high loads. The device is protected from overheating by natural ventilation, which is possible thanks to the holes in the housing.

The stabilizer body is made of durable black plastic and has the shape of a cube. The power button, LED indicator and two sockets are on the top panel, the power cord comes off from the side.

Specifications:

• phasing – single-phase;
• input voltage – 150-260 V;
• output voltage – 198-242 V;
• power – 500 VA;
• accuracy – 10%;
• cooling type – natural;
• dimensions (w/h/d) – 123/120/123 mm;
• weight – 2 kg.

The device is installed on the floor, table or shelf, next to an outlet or connected household appliances. The stabilizer copes 100% with its functions when working in tandem with a gas boiler, therefore it is recommended for owners of country houses with gas supply. Serves either one medium-power unit or two low-power household devices.

Stabilizer inverter like from the series "InStab", in terms of technical characteristics, repeating the Shtil IS350 model, but with a maximum power of 550 W. Designed for sensitive electronic equipment, including programmable gas boilers Baxi. The manufacturer produces three popular options with different output voltage parameters: 220/230/240 V.

The device provides emergency protection against interference, short circuit, overload, and excessive heating. The case has a flat shape for easy mounting on the wall. For ease of use, LED indication and a grounded socket are located on the front panel, and the power button is on the side. The power cord is also attached to the side, its length is 1.3 m.

Cooling is carried out by convection, without a fan, which guarantees almost silent operation. In addition to excellent technical characteristics, it also looks attractive and has a 2-year warranty.

Specifications:

• phasing – single-phase;
• input voltage – 90-310 V;
• output voltage – 216-224 V;
• power – 550 VA;
• accuracy – 2%;
• cooling type – natural;
• dimensions (w/h/d) – 155/245/85 mm;
• weight – 2 kg.

The device can be easily installed on the wall with your own hands using the included bracket, dowel and screw. Inverter The model is recommended for use with gas boilers in cottages and dachas. Able to work in wet rooms, degree of protection – IP20.

Model 500/1-EM is the youngest in the line ACH stabilizers from Latvian manufacturer Resanta. A suitable option for connecting one powerful unit - a gas boiler or two less powerful devices, for example, a TV with a receiver. Reliable and strong, has a set of excellent characteristics, and fully pays for its cost.

Thanks to a well-thought-out electromechanical design, the device efficiency reaches 97%, and the stabilization error is only 2%. More suitable for networks with long rises or falls in voltage, without sudden and regular surges. Network overloads activate the stabilizer’s protection, which puts it into a safe operating mode.

The metal black body has a rectangular shape. For ease of transportation, there is a handle at the top, and legs at the bottom for stability. On the front surface there is a voltmeter display, a power button, and an indication.

Specifications:

• phasing – single-phase;
• input voltage – 140-260 V;
• output voltage – 216-224 V;
• power – 500 VA;
• accuracy – 2%;
• cooling type – natural;
• dimensions (w/h/d) – 190/170/125 mm;
• 4 kg

The stabilizer is installed on the floor. If you plan to put it on a shelf, then you need to consider the weight. Recommended for use with all types of household electronic devices. Suitable for surge protection of the line supplying a gas boiler Baxi.

The birthplace of the brand and the country of production of stabilizers is Russia. The “Boiler” series is designed specifically for gas heating equipment.It is suitable for one and dual-circuit models, wall and floor. Relay devices operate around the clock, without breaks or stops throughout their entire service life.

Before launching into mass production, the devices were tested in companies Ariston And Baxi, after which they earned positive recommendations from popular manufacturers of household appliances. Device efficiency is at least 97%.

The stabilizer is protected by high-speed electronics; it is not afraid of frequent voltage drops in the power supply network. Convection cooling prevents overheating. The body is made of metal and covered with moisture-resistant paint. On the front panel there is an electronic display, power and adjustment buttons, and a socket on the side.

Specifications:

• phasing – single-phase;
• input voltage – 130-265 V;
• output voltage – 202-238 V;
• power – 400 VA;
• accuracy – 8%;
• cooling type – natural;
• dimensions (w/h/d) – 135/203/93 mm;
• weight – 2.2 kg.

Wall installation is carried out using the mounting kit included in the kit. Installation area – near the device or power outlet. The model is recommended for use to protect boiler equipment and lighting systems, test laboratory installations, water supply and security systems.

The uninterruptible power supply is designed to protect household electronics and heating equipment from any interference and failures characteristic of the power supply network.The main advantage of the device is the combination energy saving functions Green Mode and automatic regulator.

The device is equipped with 4 sockets of the EC320 C13 standard; an RJ-11 port is provided for the telephone network. After a power outage uninterruptible power supply supports the operation of electrical appliances for 12 minutes. A 7 Ah battery charges up to 90% in 6-8 hours.

Specifications:

• power connectors – 4;
• output power – 650 VA / 390 W;
• voltage – single-phase;
• indication – yes;
• charging – 8 hours;
• dimensions (w/h/d) – 98/170/305 mm;
• weight – 4.8 kg.

The power source is installed on the floor near the outlet or the electrical appliance closest to the outlet. No additional maintenance required. Suitable for heating boilers of all brands.

Series Back Basic popular brand Ippon intended for mass use to protect computer and other electronic equipment, including programmable heating devices. The device protects against all kinds of problems in the electrical network: power surges, interference, high-voltage surges, emergency shutdown.

Allows you to connect up to 3 devices, but this only applies to low-power devices. Features include the function Green Power, which triggers and turns off UPS in automatic mode at low load during battery operation.

Battery life is approximately 20 minutes if the load does not exceed 100 W. Efficiency – 95%.

Specifications:

• power connectors – 2;
• output power – 850 VA / 480 W;
• voltage – single-phase;
• indication – yes;
• charging – 8 hours;
• dimensions (w/h/d) – 100/143/278 mm;
• weight – 5.15 kg.

Installation method: floor. A heavy device can also be placed on a shelf, as long as it is securely fastened.

The device belongs to the series Professional Rackmount and is recommended for professional use, that is, for installation in a server if used with computer equipment. Suitable for ensuring the safety of heating equipment: protects against any problems arising in the electrical network.

The LCD screen displays maximum information about the operation of the device: current operation, load, power and battery status, errors. Switches to battery within 4 ms. Battery life is 1 minute at full load and 7 minutes at half load.

Specifications:

• power connectors – 8;
• output power – 1000 VA / 600 W;
• voltage – single-phase;
• indication – yes, LCD screen;
• charging – 8 hours;
• dimensions (w/h/d) – 166/118/288 mm;
• weight – 6.5 kg.

A heavy device is placed on the floor next to the outlet. In addition to the heating boiler, other related equipment can be connected to it - for example, a pump.