14 best impact drills for home: price, quality

The impact drill takes pride of place in the home tool arsenal.It cannot be said that an electric drill with a hammer is significantly different from a traditional tool. But its capabilities have become wider. An impact drill is successfully used even for unconventional operations, such as unscrewing rusty fasteners or driving upholstery nails into the wooden frame of upholstered furniture.

What to look for when choosing

There are many models of impact power tools on the market. When choosing the best impact drill, its future owner first of all expects to use it for its intended purpose in non-impact mode, but when necessary, use its capabilities, for example, punching a hole for fasteners in concrete or brick.

An impact drill is more complex than a regular electric drill. A design feature is the presence of an eccentric or hammer of approximately the same design as in a rotary hammer. But, unlike a special tool, an electric drill has a much smaller impact mechanism in size, strength and service life:

1. Due to the presence of the hammer, the mechanical part of the drill wears out faster. If we compare the service life of the impact version and the conventional one, the classic electric drill will last much longer.
2. The accuracy of drilling a hole with a drill is lower. This is again explained by the presence of a striker.During operation, the shaft on which the chuck is mounted experiences additional axial and radial loads, so an impact drill is not suitable for drilling thin and precise holes.

If you are lucky enough to buy a branded impact drill of good quality, its service life will be much longer than usual, and the runout on the shaft will be less than that of budget and inexpensive electric drills. Therefore, when choosing, the brand is very important.

Most well-known manufacturers of impact drills try to make the mechanical part optimally reliable, to add resource, perhaps even at the expense of cost. The problem is that repairing the mechanical part of an impact drill or hammer drill is expensive, and not every craftsman can do it.

Even a simple replacement of a gear-toothed pair requires professional level skills, experience and knowledge. Therefore, when choosing this part of the impact drill, you need to pay special attention. All other parts - the electric motor, bearings, electrical wiring and even speed controllers, all of this can be replaced with new ones in case of breakdown without any problems.

You also need to choose the right electrical power for your impact drill. Models with an 800-900 W electric motor easily punch holes in concrete walls and bricks; they can drill holes in almost any material. But an impact drill for home is not a hammer drill; its main task is drilling holes, which means its weight, dimensions and power should be moderate.

Therefore, the best impact drills have a power of only 500-600 watts. This will be enough for comfortable work. The capabilities of an impact drill are sufficient for drilling holes and flashing holes in concrete (brick) in 9 cases out of 10.For super-precise drilling, you can use a machine. The capabilities of a tabletop instrument cannot be compared with a hand-held one, especially the impact type.

Moreover, many owners prefer low-power cordless electric drills. They are easy to use, light in weight and have a huge torque for drilling (punching) holes or unscrewing a rusty screw. In many cases, craftsmen become so accustomed to cordless impact drills that they essentially replace all household tools - from conventional electric drills to classic screwdrivers and screwdrivers.

The universal type of cartridge also contributes to its widespread use. In some models of impact drills, it can be removed and replaced with a special one. That is, you can install a bit clamp or replace it with a drill chuck.

There is also an attachment for tightening nuts and even making cuts in sheet metal. Sometimes the manufacturing company adds a couple of such devices to the impact drill kit, but most enterprises strive to reduce the price of their products, so they save on replacement accessories and attachments.

This is interesting! The best cordless screwdrivers.

Rating of the best impact drills

To correctly compare models, it would be correct to use the same basic characteristics. When choosing an impact drill, you must additionally pay attention to:

1. Power and type of electric motor. Usually in cordless electric drills it is commutator, in expensive brands it is brushless.
2. The diameter of the tool that can be mounted in the chuck. The size of the cartridge itself.It should not be too large, since the additional inertia due to the heavy holder is strongly transferred to the hands when working in shock mode.
3. Battery capacity and operating time of the electric drill on one charge.
4. Number of speed – torque settings. Typically, impact instruments use stepless electronic adjustment rather than a mechanical switch.
5. Presence of reverse. This is a required option; without it, buying an impact drill makes no sense.
6. Manufacturer company.

Almost all manufacturing companies pay special attention to fine-tuning, fitting and adjusting the mechanical part of impact electric drills. The mechanics are carefully adjusted and adjusted during the assembly process. Therefore, there is no point in hoping for a simple replacement of the impact gear in a cheap Chinese drill. This tool doesn't work for a long time.

Each developer has his own secrets on how to make the impact mechanism more reliable and the electric motor compact and high-speed. Many companies producing impact models of electric drills and rotary hammers have made their name in this area. An example of this is Makita. Its tools are today considered a model for copying and developing your own models.

Model Whirlwind DU-25A-850

A typical mediocre model, but in the review it is one of the best impact drills in terms of price-quality ratio. The design was developed in the Russian Federation, but the tool is produced in China.

With a brush motor power of 850 W, an electric drill costs only 2,250 rubles. True, the design does not have a soft start device, so every press of the button has a noticeable impact on the hands of the master.

Characteristics:

1. Drilling diameter is up to 13 mm for metal and brick, 10 mm for concrete.
2. Weight – 1.9 kg.Despite the great power, the instrument turned out to be lightweight.
3. There is a smooth adjustment of the rotation speed of the drill.
4. The chuck is a regular collet with a key lock.

According to reviews, most owners purchased the Whirlwind as a cheap tool for construction work for one season. For many, the impact drill lasted for 3-5 years, despite the fact that the manufacturer provides a 1-year warranty. They note the comfortable handle and simple maintenance. If you change the brushes in time and do not abuse the perforation mode, the electric drill will last several times longer than the warranty period.

But this model can hardly be used as a professional one. Despite its simple design and low weight, the capabilities of the Vortex are sufficient for single cases of homework.

Intreskol DU-16/1000ER

This is not a budget option for an impact drill, especially considering its cost and the power of the electric motor. The manufacturing company equipped the tool with a 1000 W motor. For a hammer drill this is normal, but for a drill a thousand watts is too much. The total weight of the electric impact drill is 3.8 kg.

This model uses an aluminum alloy frame and gearbox housing. You can note a heavy mechanical reverse switch, a powerful clamping chuck, and reinforced bearings. Using an impact drill, a hole is punched in concrete up to 20 mm, for brick 35 mm.

Sometimes owners of Intreskol DU-16/1000ER voice complaints that the metal housing of the gearbox gets very hot during operation. This is normal, this is a technological technique that ensures stable cooling of the gearbox transmission pairs.It would be much worse if the casing was plastic, and the lubricant would burn out under heavy load due to overheating of the gears.

Intreskol DU-16/1000ER belongs to the middle class; the impact drill will appeal to those buyers who like massive and reliable power tools.

Ryobi RPD2-1000K

A fairly heavy semi-professional model with a body made of aluminum alloy with reinforced walls in the gearbox area. The weight of the electric drill is about 3 kg, so the impact on the hands during the perforation process will be minimal.

Main characteristics of Ruobi RP D2:

1. Brush motor power – 1010 W.
2. Weight – 2.9 kg.
3. Quick-release chuck, largest drill diameter 13 mm.
4. Using an impact drill, you can make a hole 15 mm in concrete, 20 mm in brick, 13 mm in metal, 50 mm in wood.
5. There is a reverse function; switching is performed by a switch on the gearbox housing.
6. The model is two-speed, but according to the instructions, one of them is recommended for clean drilling, the second, with reduced speed, is used for working in perforation mode.

The Ruobi impact electric drill is characterized by its relative simplicity of design, reliability and durability. The manufacturing company can equip the impact drill with a standard collet chuck or install self-clamping versions of the hammer drill. Due to the high power of the striker, quick-release chucks often break before the end of the warranty period.

The price of the model is 9 thousand rubles.

Daewoo Power Products DAD650

Today, this is one of the suitable options for an impact drill if you need a lightweight and precise tool. The power of the electric drill is only 650 W.This is enough for a tool weighing only 2.0 kg to punch holes in concrete up to 16 mm. The diameter of the drill that can be inserted into the chuck is 13 mm.

The impact electric drill is equipped with reverse and an electronic speed control unit. Despite the fact that the design uses predominantly impact-resistant plastic, the drill itself has good shock resistance and can even withstand a fall on concrete.

The strength and rigidity of the frame is so high that an electric drill can be installed in a drilling machine rack. In this case, it can be used not only for drilling a hole, but also for hardening the metal surface. For example, after welding reinforcement or repairing a crack.

The main difference between the Power Products DAD650 is its high build quality. The manufacturer Daewoo issues a three-year warranty on the impact drill, subject to registration of purchase and operation in drilling mode for at least half of the total time. It is clear that this condition concerns targeted purchases by enterprises for their workers.

The price for an impact drill is 2,700 rubles.

This is useful! 12 best corded screwdrivers for home and work.

Metabo SBE 650 (BZP)

One of the best models of professional-level electric impact drills. Metabo hand tools have always been distinguished by high reliability, good design, and acceptable build quality.

Main characteristics of Metabo SBE 650:

1. The drilling diameter in concrete is up to 14 mm, in brick 16 mm, in steel 13 mm.
2. Electric motor power 650 W.
3. Electronic speed control is provided using the proprietary Vario system.
4. There is a switch for the direction of rotation of the cartridge.

The Metabo SBE 650 impact drill is equipped with a double chuck. Inside the clamp, in the bottom part, there is a hexagonal pop-up clamp into which you can insert a bit. Thus, an impact drill can be used to tighten screws or unscrew rusted fasteners.

The price of a Metabo SBE 650 impact drill is at least 10-11 thousand rubles.

Makita HP1640

Engineers at a hand tool manufacturer initially design their products to withstand the most adverse operating conditions. That's why almost all Makita tools have a reputation for being indestructible.

The Makita HP1640 impact drill model is one of the simplest and most affordable, only 7,000 rubles. At the same time, the power of the electric motor is 680 W. The gearbox and striker are manufactured using the company’s traditional technology of forging, heat treatment and nitriding of the working surface.

Makita HP1640 Specifications:

1. Weight – 2.48 kg.
2. Chuck with key.
3. Electronic speed control.
4. Drilling diameter in concrete is up to 13 mm, in brick up to 16 mm.

The only drawback of this model is the lack of an electronic speed stabilization system. Typically, branded drum models have this system installed by default. Although, according to many craftsmen, such a system is not relevant for electric drills with a hammer.

In this case, the company deliberately abandoned its use in order to make the impact drill more reliable and at the same time reduce the cost of its production.

AEG SB2E 1100RV

Impact drill from a famous German brand. But most of the instruments are produced in China, so you can only buy a licensed copy of the “German” on the market.The company's engineers managed to optimize the body shape, speed and operating frequency of the firing pin. The impact drill turned out to be extremely successful, convenient and durable even under extreme loads. The manufacturing company provides a 6-year warranty on the electric drill.

Characteristics and design features of the AEG SB2E 1100RV:

1. Power – 1100 W, commutator motor, but the design uses graphite brushes with increased wear resistance.
2. Housing made of impact-resistant plastic with rubber inserts, gearbox made of high-strength aluminum alloy, forged gears.
3. There is a reverse with a mechanical rotation direction switch.
4. The chuck is quick-release; if necessary, it can be replaced with a regular collet.
5. Weight 2.9 kg.
6. Drilling holes in concrete - 20 mm, metal - 13 mm, brick - 24 mm.

In addition, the design provides lighting and electronic control of rotation speed. Users especially like the long cable length. This impact drill has a power cord of up to 4 m. The impact drill comes with a storage case and a set of accessories.

The price of the model is 13.5 thousand rubles.

Best Cordless Impact Drills

Many sellers of hand-held power tools classify hammer-operated and battery-powered electric drills as a separate type, with impact modes being classified as impact screwdrivers. Therefore, if the desired model is not found in the impact drill section, it makes sense to look for a tool in the battery-powered screwdrivers category. A battery powered tool has its advantages:

1. Easier to use, no cord.
2. Can be used for work in the country, in any place where there is no electricity.
3. Great torque.

A drill with a reinforced gearbox will last longer than a regular one, and the likelihood of breakdown is several times lower. The only downside is that you need to purchase spare batteries.

WORX WX371.1

Impact version of the drill from the German brand “WORX”. The model turned out to be stylish, comfortable, with a lot of interesting functions. The drill is quite heavy, weighing 2.38 kg, which indicates the use of a large number of metal parts in the frame and casing.

Features of the WORX WX371.1 impact drill:

1. Use of powerful Powershare 2 Ah batteries, universal type with built-in protection.
2. The electric motor has almost a 30% reserve in terms of power (torque) and service life.
3. It is possible to select the amount of torque by turning the marking ring located immediately behind the cartridge. A total of 18 torque setting positions are available.

The chuck is collet, but is clamped without a key. That is, you can change the tool and hold it with one hand. You just need to press the shaft rotation lock button. This scheme makes an impact drill almost a complete analogue of a screwdriver.

The design turned out to be reliable in operation.

The cost of WORX WX371.1 is 12,800 rubles.

Einhell PXC TE-CD 18/40

Another German brand of hand power tools. This time a powerful yet lightweight cordless impact drill for professionals. The weight of the electric drill is only 1.46 kg. The drill comes with a storage case, a set of drills and bits.

An 18V, 2Ah battery is used as power supply; it charges in 35-40 minutes. The handle has a bracket for hanging the electric drill on the shoulder strap. That is, an impact drill can be used not only in the house, but also on the roof, for installation work at heights. The maximum torque is 40 Nm at a speed of 1500 rpm.

A special feature of the impact drill is the presence of 21 torque adjustment positions. There is a reverse direction of shaft rotation. Collet chuck with manual fixation, drill diameter – from 1.5 mm to 13 mm.

Price 10 thousand rubles. The manufacturing company provides a 3-year warranty, subject to registration of purchase.

DeWalt DCD776S2

One of the best battery models with shock mode. The weight of the electric drill is 1.72 kg, so you can easily work with one hand in any position. Li-Ion batteries with a voltage of 18 V are used for power supply. The kit includes a box and a charger.

The chuck allows you to clamp drills and bits with a cross-section of up to 13 mm. The maximum diameter in concrete is 10 mm, in brick and metal - 13 mm.

There is an electronic speed controller and a locking button.

An impact drill develops a lot of torque, so when mastering the tool you need to be careful when starting it so as not to injure your hand.

The model is distinguished by high quality parts of the reduction gearbox and support bearings.

The price for an impact drill is 16.8 thousand rubles.

Makita DHP482Z

Another tool for a professional, always present in any ranking of the best. The impact drill turned out to be lightweight - only 1.8 kg. For operation, they use universal Li-Ion batteries with an operating voltage of 18 V. But impact drills go on sale without batteries and chargers.

Makita has a lot of torque. At a speed of 600 rpm, the cartridge produces a torque of 62 N*m. When rotating at maximum speed - only 36 N*m. In total, the impact drill has 23 adjustment positions. The value is set on the vernier of the rotary coupling (ring).

Drilling holes with maximum diameter:

1. Concrete – 13 mm.
2. Brick – 15 mm.
3. Metal (not steel) – 13 mm.
4. Wood – 38 mm.

Universal chuck with quick fixation, you can install a bit or drill with a diameter of 1.6-13 mm. The main advantage is that the Makita DHP482Z is ​​fully adapted for assembly operations in highly dusty conditions. The design uses a brush electric motor; the brushes are easily blown and freed from dust.

Price for Makita DHP482Z – 7900 rub.

Ryobi ONE+R18PD7

One of the popular drill models with impact mode. Despite the fact that the electric drill is produced in China, the Ryobi ONE+R18PD7 differs from its competitors in its durability and long service life.

Most of the tools are made from Japanese parts and components; these drills are especially valued for the good quality of the chuck and gear parts. Some of the tools are produced from local units, as a result, the Chinese Ryobi ONE+R18PD7 is cheaper, but inferior to the original in terms of durability. You can distinguish one model from another only by the markings on the engine.

Tool characteristics:

1. A brushless (apparently stepper) motor is used.
2. Quick-release chuck (keyless), ½ fit. The diameter of the drill or bit is from 2 to 13 mm.
3. The design includes a shaft brake, as well as lighting and reverse.
4. The direction of impact is along the axis of the cartridge.
5. Torque – 85 N*m.

The ring clutch allows you to choose one of 24 fixed rotation speeds. To operate in perforation mode, a side handle can be installed on the drill. One 1.3Ah battery is enough to drive 455 screws or drill 100 16mm holes to a depth of 50mm (in wood).

Overall, a reliable and practical drill with an easily adjustable perforation mode. The manufacturer guarantees the tool for 5 years of operation.

The cost of the drill is 11,300 rubles.

AEG 18B BSB

One of the powerful cordless impact drills. Features a huge torque. If the standard for most battery-powered models is only 40 N*m, then the AEG 18B BSB produces as much as 110 N*m at a cartridge rotation speed of 500 rpm.

Standard Li-Ion batteries with a capacity of 2-4 Ah are used as an energy source. The tool comes with a charger and an additional handle for holding the electric drill with both hands.

Collet chuck, keyless, quick-release. Planting diameter – 1.6-13 mm. You can install a bit or a drill. If the drill is used as a screwdriver, you can replace the collet with a bit holder.

In addition, the design uses a brushless electric motor, so the service life of the electric drill is approximately twice as long as the standard. This model has a reverse and two positions for regulating the speed of rotation of the cartridge.

A special feature of the drill is the use of a special device in its design - a brake, with which you can temporarily reduce the rotation speed of the chuck. This avoids stress on the master’s hands.

The disadvantages include the heavy weight of the tool - 4 kg and the high price - 32 thousand rubles.

Bosch GSB 18V-50

Unlike previous models produced in factories in China, this impact drill is assembled in Malaysia on a production line built by Bosch. The drill was produced to conquer the Southeast Asian market, so the mechanical assembly quality of the Bosch GSB 18V-50 is better than that of its Japanese and Chinese competitors.

The drill is equipped with two 18 V batteries with a capacity of 2 Ah, a main and a spare, plus a charger. It lasts for 30-35 minutes of work.

In general, the tool turned out to be light - 1.4 kg, but the engine and gearbox are somewhat weaker than those of competitors. Torque is only 50 N*m. To fix a drill or bit, a 1.5-13 mm quick-release chuck is used. According to user reviews, the quality and reliability of the cartridge is much higher than that of Chinese models.

The design uses a two-speed rotation gearbox and an axial hammer. In the perforation mode of the Bosch GSB 18V-50, the blow frequency is noticeably higher (up to 27 thousand), and the amplitude is slightly lower than that of Japanese drills. You can drill holes up to 35 mm in wood, and up to 13 mm in brick and metal.

Particularly noteworthy is the good balancing of the drill in the hand. That is, the load on the hand is distributed evenly, which simplifies working with the drill in perforation mode. There is a metal clip on the handle, which makes it possible to attach the tool directly to the installer’s waist belt.

The cost of the Bosch GSB 18V-50 electric drill is 19 thousand rubles.

To choose a good impact drill for your workshop, you need to try at least a dozen models from different manufacturing companies. The tool is usually rented, and as a result, after a couple of weeks of work, you can form your own opinion about which drill deserves first place in the ranking.

Tell us about your experience in choosing an impact drill - which model can be considered the most successful?