Malfunctions of Darin's gas stove: frequent breakdowns and how to fix them

Over time, all gas stoves tend to break, regardless of the brand of equipment.The gas stove of the domestic manufacturer Darin was no exception, which after several years of operation can fail. Depending on the type of malfunction of Darin’s gas stove, you can make repairs yourself after first studying the design features of this brand’s equipment.

After all, you will agree that it is much more profitable to repair equipment yourself than to waste time and money calling a specialist.

Among the most common malfunctions of Darin’s equipment are the gas control system stopping, the formation of a crack on the electric ignition plug, and the oven door breaking. Repairing Darin's gas stove will not require special knowledge and skills from you, which means that you can find all the necessary information regarding methods for eliminating breakdowns of such equipment in our article.

Typical breakdowns of Darin's gas stove

As practice shows, due to the daily use of a gas stove, the auto-ignition system is the first to fail. A rather fragile device can break due to accidental entry of water or food into the spark generation unit, which is why the function simply stops working.

To eliminate such a problem, it is enough to determine which part has failed and replace it with a new element.

Before replacing a supposedly broken part, it is recommended to clean it with a simple brush, because in most cases it is contamination that causes the equipment to stop working

To maintain proper operation of the gas stove, it is important to promptly clean not only the hob, but the control panel, including the internal parts of the housing.

But equipment does not always break down only due to contamination, which means it is worth taking a closer look at the most common breakdowns of Darin’s gas stove.

Malfunction of electric ignition of the stove

When trying to light the burner, a noticeable click may be observed, after which a spark usually appears, but not in this case. If only one burner does not turn on, then the problem most likely lies in the piezo ignition electrode (candle) stopping working. Due to prolonged use of the gas stove, a crack may appear on the ceramic surface of the candle, due to which electric ignition stops working.

Often the auto-ignition function fails due to damage to the wire connecting the electrode and the spark generation unit. There is only one way to confirm a breakdown - remove the stove cover and press the ignition button. If the wire is damaged, then in the area of ​​the broken area you will see a spark jumping onto the body of the stove.

The electric ignition function may not work on all burners of the stove, including the oven, which means only one thing - the ignition unit is out of order and requires urgent replacement

In both cases, replacement of the broken part will be required in order to restore the piezo ignition system. The first thing you need to do is disconnect the device from the power supply, but before you open the top cover of Darin’s gas stove, you need to remove all the burners.

If two or all four burners do not work, you will have to purchase a new ignition unit and replace it yourself.

Failure of the gas control system

All modern models of Darin gas stoves are equipped with a gas control system, which ensures safe operation of the equipment. Parallel to the electric ignition plug on the burner there is a flame sensor - a thermocouple, which, when heated, generates an electric current. If the thermocouple is working properly, the valve opens to supply gas to the burner.

Otherwise, immediately after releasing the handle, combustion will stop, which means only one thing - the solenoid valve did not work, and the supply of the combustible mixture to the burner is completely shut off.

The thermocouple may stop working due to simple damage to the part itself, which is the wire connecting the flame sensor to the solenoid valve.

If you do not find any damage to the thermocouple, then before installing a new system, you should try to clean the flame sensor from accumulated grease

If even after cleaning the burner flame continues to go out, you will have to purchase a new one. thermocouple and replace it on one's own. Since Darin’s gas stove has its own structural features, the part should be selected in accordance with its model.

If possible, it is better to buy an original thermocouple - this will guarantee a long service life of the gas stove.

Burner jet clogged

The problem of contamination of the nozzle (nozzle) of a gas stove can arise due to the ingress of grease, detergents and gas combustion products. In this case, the repair will consist of cleaning the nozzle nozzle, and it is best to use a wooden toothpick.

Since it is not always possible to effectively clean the nozzle hole, it is recommended to disassemble the plate for better access to the part.

To do this, you will need to remove the top panel, having first unscrewed several bolts, remove the nozzle, and clean it from clogging. If necessary, the toothpick can be made a little thinner so that it can fit into the nozzle hole.

When cleaning the nozzle, it is not recommended to use metal objects such as wire, paper clip or needle, as this may cause internal damage to the part.

The most common failures of jets only relate to their contamination, so it is extremely rare to replace the part.

Necessity replacing jets in a Darina gas stove can only occur if you decide to switch from stationary blue fuel to liquefied gas from cylinders, and/or vice versa.

How to disassemble a gas stove?

Repairing Darin’s appliances may require certain knowledge and skills, which is why it is so important to know how to properly disassemble a gas stove with your own hands. The first thing you need to do is unplug the appliance from the outlet and close the gas shut-off valve.

After ensuring your own safety, you can proceed to the next steps, sequentially disassembling each part of the equipment.

Next, we will tell you how to remove the most important elements of the case to provide access to the necessary parts of the device.Since the internal structure of all gas stoves is almost the same, the following steps are suitable for disassembling equipment of any model.

Removing the handles of the gas stove

During operation, the handles located on the control panel gradually become dirty, and grease can get not only on the surface of the switches, but also inside their housing, which is why they can be difficult to turn.

The only sure way out is to remove the handles and clean them of accumulated grease and food debris using soap or ammonia.

The most effective remedy in the fight against fatty stains is ammonia solution, for the preparation of which you will need to mix alcohol and water in a 1:1 ratio.

If the regulators are being removed, it wouldn’t hurt to soak them in the solution for at least 5 minutes, then remove any remaining dirt using the hard side of a sponge or an old toothbrush. In this case, you need to figure out how to properly remove the handles from Darin’s gas stove without damaging the body of the equipment.

The handles on Darin’s gas stove can be removed quite easily, and you don’t have to pry them off with a knife or screwdriver. First of all, turn off the gas supply valve and check that all the knobs are turned all the way. Next, we wrap our fingertips around the ring that covers the holes behind the handle, rest our phalanges of fingers on the surface of the plate, and pull toward ourselves until the handle comes off completely.

If the contamination is so severe that you cannot remove the handles yourself, you can try to carefully pry them off with a chisel or knife. However, be careful not to scratch the body of the cooker.Since the switches are plastic, do not pull them with all your force, otherwise you may simply break them.

For more information on how to remove the handles from a gas stove and what to do if they cannot be removed, read Further.

Removing the oven door

Often the need to remove the oven door arises due to bending of the brackets, which is why it does not close well.

This situation can occur due to the structure being overloaded, for example, if a heavy object is placed on an open door. Thus, the brackets no longer perform their function of pressing the sash, and as a result, a gap appears between the door and the body of the plate.

You should not try to remove the door with a crowbar, because due to the damage left behind, you may need to replace some parts, which will entail large financial costs

Since the principle of fastening the oven door is the same for all stoves, it is worth familiarizing yourself with the uniform instructions for removing the door yourself. First of all, you will need to fully open the oven door and find the door hinge latches that hold it in place.

Next, it is important to follow the instructions presented, maintaining the sequence of actions:

• fold the door hinge latches back and slowly close the door until they rest against the slots on the door;
• pull the half-closed door towards you, while the distance between the inner wall of the door and the oven should be equal to 10-15 cm, and slowly lift it;
• We remove the hinges from their sockets on the body and remove the door without much effort.

In this case, it is important to take into account the heaviness of the door, so as not to accidentally drop it after removal.

If the door has been successfully removed, then the first thing you will need to do is assess the extent of damage to the brackets and, if necessary, purchase new parts.

Conclusions and useful video on the topic

You can learn how to quickly remove the top panel of Darin’s gas stove from this video:

Instructions for restoring the operation of a gas oven thermocouple are presented in the following video:

Despite the high quality of assembly, Darin gas stoves have their weak points, which leads to premature breakdown of the equipment, long before the end of its service life. To avoid large financial costs for calling a technician, you need to understand the features of Darin’s gas stove and fix the breakdown yourself.

The article listed the most common equipment malfunctions and also revealed ways to eliminate them. Based on the instructions presented, you will be able to disassemble Darin’s gas stove with your own hands and clean contaminated parts or, in case of breakdown, replace them.

If you have already had to repair Darin’s gas stove by first disassembling the necessary part of the body, please share your experience with our readers. In the comments below the article, you can tell the story of the breakdown of your gas stove, as well as talk about the difficulties that you had to face during the repair process.