LED lamps "Era": reviews of the manufacturer + brief overview of the model range

Many people believe that LED lamps are a new stage in the development of lighting devices.Until recently, they were overly expensive products that not everyone could afford.

Today, everything has changed and choosing a high-quality and inexpensive product is not difficult. But which manufacturer should you choose? A good solution would be Era LED lamps, which are in unprecedented demand.

Next, we will tell you in detail about the products of this company, give the advantages and disadvantages of lighting devices, and also tell you what points you need to pay attention to when purchasing so as not to make a bad choice.

Characteristics of lighting sources

The product range has been actively developing and increasing since 2004. The steady emergence of new models of lighting devices is associated with the presence of our own engineering center.

At the same time, only qualified specialists take part in the design of new models. To ensure the quality of products from a domestic manufacturer, let’s look at the catalog of offered products in more detail.

LED and halogen lamps

These types of lighting fixtures are in greatest demand today.An LED lamp is a product that runs on semiconductors. In this case, the spectral range completely depends on the chemical composition of the components.

The main secret of the success of LED products from the Era company is their durability. In practice, it has been verified that such a device can last tens of times longer than a classic incandescent lamp.

At the same time, it consumes an order of magnitude less electricity. Read more about LED lamps and the principles of their operation. Further.

The LED lamp is equipped with a highly durable bulb that can withstand even the most severe use. There are no mercury components in the composition, which makes the product completely safe for use at home, in the office or in production.

As for halogen light bulbs, they are very similar to conventional incandescent light bulbs. The main difference is that the former are filled with an inert gas, which is supplemented with halogens or a compound thereof.

This solution makes it possible to significantly reduce the evaporation rate of the incandescent body.

The scope of use of halogen lamps is very limited. As a rule, they are used only for design purposes. For example, spot systems, as well as various sconces or floor lamps, are equipped with such lighting devices.

Using halogen products as the main light source is extremely unprofitable. After all, their energy consumption is not much less than that of standard incandescent lamps

Is the cost of an energy-saving lamp justified?

The development of technology could not but lead to the emergence of new, more economical lighting sources. After all, the operating principle of a classic incandescent light bulb is technically and morally outdated.

Therefore, the manufacturing company "Era" offers to order high-quality energy-saving lamps.

A unique feature of this kind of lighting devices is their efficiency - 70-80% less electricity is required to operate. As a result, utility costs will be much lower.

Energy-saving lamps will be able to reveal their potential only after some time, when they finally heat up.

But engineers were able to solve this problem by integrating an adaptive ignition system. Therefore, lighting fixtures of the Era brand turn on almost instantly, while the possibility of their failure tends to zero.

The domestic manufacturer produces 7 types of energy-saving lamps. Each of the devices offered to the buyer is distinguished by its environmental friendliness. This was achieved using the amalgam (mercury-free) production method.

As for installation, the product can be installed in absolutely any lamp, chandelier, floor lamp or sconce. This versatility is due to the size of the housing, which is almost identical to the dimensions of a classic incandescent lamp.

Decorating a room with LED strip

Strips consisting of the nth number of LEDs appeared on the Russian market just a few years ago. But thanks to their versatility, they were able to win the love of customers, which was the reason for their widespread use.

They are often used by designers to decorate the interior and exterior of various buildings, restaurants, shopping pavilions and much more.

The list of distinctive features of LED strips of the Era trademark should include the following:

1. Durability. Subject to the basic operating rules, the product will last at least 40,000 hours. That is, this is about 7-8 years of continuous work.
2. Environmental friendliness. The tapes do not contain any components that would be harmful to the environment.
3. Safety. The tape operates from a fairly low voltage. It is not life-threatening and the user is unlikely to receive an electric shock.

The company offers more than 40 varieties of such products. Moreover, the catalog contains models operating on 220 and 12 volts.

In addition, you can order a number of special accessories and power supplies that will make installation even simpler and operation more comfortable.

The LED strip requires a minimal amount of electricity to operate. This allows you to uniquely personalize your workplace, the interior of an apartment or house, a retail space or a restaurant without increasing costs.

Classic incandescent light bulbs

Lamps with a filament body are a regular glass flask, which is filled with an inert gas or vacuum. Inside there is a spiral made of tungsten, which, when an electric current passes through it, heats up and emits light.

Yes, such lighting products are inexpensive. On average, their price varies from 15 to 20 rubles. But they also require a lot of electricity to operate.

And their service life is short - if the light bulb operates on standard voltage, it will last about 1,000 hours. Well, if the voltage is reduced to approximately 130 volts, then the service life increases by 2.5 times - up to 2,500 hours.

And you can read about the intricacies of choosing incandescent lamps, their varieties and markings Here.

The Era company produces incandescent lamps. They are shaped like a ball or a candle. The buyer is also offered designer models with a decorative mirror coating applied to the flask

Types of decorative LED light sources

The scope of use of decorative lighting devices is not limited to their use for decorating apartments or private houses. They are often equipped with catering establishments, offices, and sales areas.

The Era product range contains an impressive number of models of decorative LED lamps.

For the convenience of the buyer, depending on their purpose, they are divided into the following categories:

1. Modular LED systems. This solution is intended for illuminating corners, cabinets, areas along walls, wall shelves, etc. The equipment is turned on using a touch panel. The length of the system can be increased by connecting several individual elements.
2. Garden and yard equipment. This type of lamp is used to illuminate the garden area. At the same time, Era brand lamps are often equipped with batteries that can store solar energy.
3. Night lights. Lamps can have a wide variety of geometric shapes. They are often made in the shape of plants, movie and cartoon characters, and also in the shape of animals. They are characterized by low power.
4. Spot lighting. As a rule, such devices are sold in sets, which allows you to properly illuminate the room. Products can be waterproof, cast or mounted.

A wide range of decorative lighting devices provides the opportunity to realize even the most interesting and daring creative ideas.Now you can easily make your home as comfortable as possible to live in.

Decorative lighting, as a rule, consumes several times less electricity than classic incandescent lamps. Well, their service life reaches tens of thousands of hours; on average, they can work continuously for 7-8 years

Industrial types of LED devices

If you need to ensure the proper level of lighting in a production workshop or large conference room, then industrial LED lamps are the best solution. This type of equipment differs from its analogues by much greater power. At the same time, they provide a soft, pleasant light.

When designing industrial LED lamps, the company's engineers focused on their reliability. The body of the product is sufficiently durable and can withstand extreme use. The optics are impact-resistant and coated with a special protective layer.

Lanterns and table lamps

The comfort of working at a desk depends entirely on the quality of lighting. At the same time, a well-chosen lamp will save your eyesight.

Tabletop lighting equipment of the brand in question is manufactured in accordance with all standards and regulations. For this, only high-quality plastic and metal are used. The device is equipped with a special ballast that prevents the lamp from flickering.

Domestic tabletop lighting equipment meets the IP20 category in terms of safety. But if problems arise, the buyer can return the product within a year from the date of purchase. This applies to all models of Era table lamps

As for flashlights, the manufacturer offers high-quality products, the design of which is thought out to the smallest detail.They can be used in absolutely any area of ​​human activity.

Today “Era” offers the following types of LED lights:

• children's;
• Pocket;
• motor transport;
• tourist;
• floodlights.

There are also universal models. They are a must have for every home craftsman. Their peculiarity lies in their convenient form factor and high power.

Useful additional accessories

When connecting LED equipment, some additional elements may be needed. The company's product range includes light filters, motion sensors, extension cords, plugs, switches, sockets, and wires.

All this can be found on the relevant pages of the organization’s official website.

Advantages and disadvantages of Era products

Judging in general terms, the company is a reliable and experienced supplier whose product quality is as close as possible to European standards. She often received awards and became a laureate of various design competitions.

The manufacturer tries to produce products for people. Therefore, the product is distinguished not only by its quality, but also by its aesthetics. Many models can rightfully be called a work of technological art

Among the many advantages of the company, the presence of its own engineering center should be especially highlighted.

Thanks to this, the range is regularly updated with new, truly unique models of lighting equipment. The manufacturer can guarantee that its products are completely safe for the consumer.

Many modifications of lamps are equipped with an automated control system.This addition makes it possible to set the color mode, select the glow temperature, and the radiation level.

It is also worth adding cost-effectiveness to the above features - in addition to the fact that their operation requires a minimal amount of electricity, they also cost adequate money. Therefore, a consumer with any income level will be able to afford such a purchase.

There is only one drawback - weak fasteners. But this problem can be solved quite easily by using additional parts.

Customer reviews about the manufacturer

In general, consumers speak positively about Era products. The durability and trouble-free operation of energy-saving light bulbs are especially highlighted.

The only disadvantage that many buyers note is the inability to use lighting devices with dimmers.

Judging by the reviews, the fact that Era electrical products are products accessible to everyone is confirmed. The company managed to maintain the perfect balance between performance, reliability and affordable price

How not to make a mistake with the choice?

Simply a huge assortment creates a number of problems for the unprepared buyer when choosing. After all, not every consultant will recommend a truly optimal solution.

Therefore, before visiting the website of the manufacturer of electrical devices and ordering anything, it is advisable to familiarize yourself with the list of main characteristics.

What do you need to know before purchasing?

LED lamps do not heat up during operation. Therefore, they can be installed in suspended ceilings. But you need to remember that if the lamp overheats, it may stop working.Accordingly, such decisions should be abandoned when arranging saunas.

There is a detailed article on our website where we examined in detail the intricacies of choosing light bulbs for suspended ceilings. More details - go to link.

LEDs can provide pretty good local lighting. At the same time, their small dimensions allow them to be placed absolutely anywhere.

As for installation, the installation of Era LED equipment is no different from the installation of lighting fixtures with incandescent lamps. Any average home craftsman can cope with this.

You can use a dimmer to control the lighting. But not all LED devices support this function. Therefore, before purchasing the product, you need to clarify this point with the manager.

Important nuances about lamps

Base. It represents that part of the LED equipment that ensures contact of the product with the electrical network.

They are divided into two main categories: pin and screw. The marking of the latter variety contains the letter “E”. Pin sockets, in turn, are designated by the symbol “G”.

After the above letters there is a specific number. It indicates the distance between the pins. Moreover, the value is indicated in millimeters. The most popular bases are GU10, GU5.3, G9, G4, E14, and E27.

For more information about the types of LED lamp bases and their markings, read this material.

Choosing an installation location. Installation of products can be carried out in a wide variety of places. But in order for the light bulb to last as long as possible, you need to know which type is best to install.

So, for lighting a room, the ideal solution would be a device whose power is about 1/8 compared to an incandescent lamp. In the hallway or pantry, an LED strip will be sufficient.

When choosing LED equipment for outdoor use, it is best to give preference to completely sealed models with 1-3 LEDs. In this case, the light bulb should be bright enough, as it will illuminate the front door or porch.

LED strips are well suited for organizing local lighting. They can be glued to the surface of a hanging cabinet or shelf. They can make the room much more comfortable and brighter

Power and color temperature. In terms of their luminous intensity, diode devices are equivalent to conventional incandescent light bulbs in a ratio of 1 to 8. Therefore, instead of 100 V, you can purchase a 12 V model.

As for color temperature, you need to choose it depending on personal preferences. Remember that above 2700 is a warm white, while anything closer to 6800 will produce a cool glow.

LED lamp diagram. As a rule, such lamps are assembled according to a circuit where capacitors limit the current flowing to the LED. In this case, the ripples of the rectified voltage are preliminarily smoothed out, which causes the glow.

Several different LEDs are connected in series. Therefore, if one of them burns out, then all the others will go out. You can give preference to models with parallel connections, but they will cost more.

Dimensions and number of LEDs. When deciding on the number of elements, you should not be guided by the rule: more is better.

After all, it is not always the case that a model containing 90 components gives a better effect than its counterpart with 24 LEDs.In this case, the decisive factor is the ratio of the device’s luminous flux to its power consumption. It should be maximum.

Conclusions and useful video on the topic

Comparison of LED lamps from popular manufacturers:

Review of LED lamps "Era":

LED lamps manufactured by the Russian company Era are an example of high-quality products. The manufacturer hones every detail. Therefore, if you take into account all the above tips for choosing and order products on the official website, you can count on long-term and efficient operation of the lighting device.

Already have experience using LEDs from the Era company? Please tell me if you are satisfied with their work? Leave your comments in the block below the article.