TOP 9 best hydraulic presses: 2023 rating, review, price, quality

Among the various technological and repair equipment, hydraulic presses still look like a curiosity. By force of habit, they are classified as production equipment used in industry.In fact, a hydraulic press with electric, manual or pneumatic drive — One of the most popular tools for repairing cars and transport equipment.

What to look for when choosing

Using a modern hydraulic press, you can try squeezing juice or gluing bags of veneer and boards, but most likely the process will be ineffective. The hydraulic press is slow with a relatively short rod stroke, so it is clearly not suitable for such operations. There are lighter manual and electric devices for this.

The main purpose of a hydraulic press comes down to four operations:

• straightening and bending of car body parts;
• precise bending or upsetting of new parts during the sizing process;
• creating press connections of two parts from different materials;
• settlement of bushings, rings, couplings, liners with adjustable tension.

The best hydraulic presses allow you to produce (stamped from sheet steel) unique tuning elements for bumpers, wheel covers, trim parts for wheel arches and motorcycle tanks. But these are rather single copies; even for small-scale production, industrial-type hydraulic presses are needed.

Two main factors distinguish a repair hydraulic press from grape and fruit presses (juicers). Firstly, there is a huge force on the rod, on average from 50 tons to 100 tons. Secondly, this force is adjustable. It is created in a hydraulic chamber by dosed supply of liquid.At any time the load can be reduced or fixed.

Basic criteria for choosing a hydraulic press

Before purchasing a hydraulic press, you need to know exactly for what purpose the equipment is being purchased. If your work plans require you to constantly press out or press in bearings, dismantle small bushings, shafts, and couplings, then it is quite possible that a small manual hydraulic press with a working force of up to 10 tons will be sufficient.

To straighten bodies, beds and frames welded from I-beams, you will need a floor-mounted hydraulic press with a force of 30-50 tons and a stroke of up to 20 cm.

Often, a workshop purchases a floor-mounted hydraulic press with a force of 60-100 tons. Although during operation, 50-60 tons are sufficient. There is a rational grain in this solution, since the wear of seals and cuffs in a hydraulic press is 40-50% less, respectively. the period of trouble-free operation increases.

However, repairing a 100-ton hydraulic press is more expensive, and such equipment also has low accuracy of force application. If you have no work experience, you can easily crush or deform the part.

Hydraulic presses are available in vertical and horizontal versions. The latter option takes up less space in the workshop, it is more convenient to place the parts under the punch, but there is an error in the direction of the force, plus the rod seal wears out much faster.

This is useful: How to choose a hydraulic pipe bender.

Review of the best hydraulic presses

The rod drive can be manual, electrohydraulic or pneumohydraulic. The first option is suitable for any workshop; presses with manual injection of hydraulic fluid account for up to 30% of all operations.

Electrohydraulic ones, as a rule, require an independent connection to a 3-5 kW electric pump, so a 380 V network is required. Electric versions of hydraulic presses should not be chosen if there is an unstable power supply in the area.

Pneumohydraulic pressing equipment is ideal for workshops equipped with a receiver and a compressor. The air pressure in the discharge part of the press, as a rule, does not exceed 8 At, and with the help of a valve you can quickly relieve the force on the rod. The review of the best will include all three options.

AE&T T61210T

A classic version of a tabletop hydraulic press with a “window” design. Hydraulic presses of this type are available in any auto repair shop. They are used primarily for assembling and disassembling vehicle chassis components, crimping bearings, engine head liners, or repairing shock absorbers. The service life of hydraulic presses type T61210T with timely maintenance and replacement of hydraulic fluid is up to 25 years.

Characteristics:

• weight - 45 kg;
• developed pressure-force - 10 t;
• height - 80 cm, lift of the support table - 47 cm.

The design of the hydraulic press is such that if the fluid supercharger breaks down, it can be temporarily replaced with a conventional hydraulic or screw jack - a five-ton jack. As a rule, this is enough to complete the work before replacing the broken unit with a new one.

Disadvantages - a complex arrangement of seals on the rod; when constantly working at maximum force, hydraulic fluid may leak.

Price - 23 thousand rubles, warranty - 6 months.

HORDBERG N3630L

Nordberg — not just a position in the ranking of the best models. This is truly one of the best floor standing hydraulic presses with manual pressure injection. This is relatively light equipment, the weight of a hydraulic press — only 150 kg.It can be easily moved within the same room. Developed force — 30 t, with a rod stroke of 15 cm. This is quite enough to solve 90% of problems related to the repair and restoration of press connections.

Advantages of the N3630L model:

1. The convenient location of the manual pump-drive, which supplies hydraulic fluid to the working cylinder. In all other HORDBERG manual presses, as well as in most competitors, the drive is made inconvenient to use.
2. Convenient working space under the rod, the support platform can be raised or lowered within 90 cm.
3. Easily repaired. You can replace the manual drive and pump the hydraulic fluid within an hour.
4. The frame is collapsible on self-centering pins.

This solution is safer to use. If the post breaks under load, the metal of the pin is simply deformed by the shear load. Welded frames and bodies are destroyed with the scattering of weld materials.

The disadvantage is the inconvenient location of the control pressure gauge. It is necessary that the device is in the same field of view with the part and the rod.

The price for a hydraulic press is 65 thousand rubles, guarantee — 12 months

AE&T T61110W

Universal hydraulic press with L-shaped frame. The design was developed in Russia and produced in China. Simple, compact, with a maximum force of up to 10 tons. Weight - 60 kg. The hydraulic press was designed and is used primarily for the repair and maintenance of the chassis of cars of all models.

Characteristics:

• manual drive using a high-pressure remote pump;
• working space (height) - 450 mm;
• stroke of the working rod is 120 mm.

Users estimate that the force on the drive handle is half that of a conventional hydraulic jack. The only drawback is that the press injection system uses a special hydraulic fluid. If you work daily, then after a year you will need to change the hydraulics: fluid and seals.

Price - 39 thousand rubles. Warranty - 12 months.

Ombra OHT611M

Garage version of a tabletop hydraulic press. The frame is welded from structural steel. A jig made of high-strength cast iron is placed directly under the part on the work table. All other parts are made of low alloy steel. The force created is 10 tons. That is, this is the level of a high-quality hydraulic jack for a truck.

The table can be raised and fixed in three positions. In this case, the output of the rod from the cylinder is only 150 mm. In general, the design turned out to be convenient to use.

The only disadvantage of a hydraulic press is the small distance between the posts, only 45 cm. For repairing a passenger car, this is enough, but for any other equipment it is better to choose more powerful presses with a wide working area.

Price — 30 thousand rubles, guarantee — 6 months

GARWIN 021007-30

The brand is German, the instrument is made in China. Hydraulic press for 30 tons, positioned as a professional one. Welded frame made of low alloy steel. Table material — cast iron with stainless steel insert. Frame dimensions: height — 210 cm, distance between posts — almost a meter. Weight — up to 180 kg.

Externally, in design and shape, the GARWIN 021007-30 hydraulic press is practically no different from most pressing equipment with the same characteristics.Many users note that Garmin has a lot of “nice” little things, such as convenient table height adjustment, hardened mounting pins, and fairly fast hydraulic rod travel. All this makes working on a hydraulic press more comfortable and safe.

Cost - 85 thousand rubles. with a 12 month warranty.

WIEDERKRAFT WDK-HP201

Popular model of hydraulic press with pneumatic booster. Developed in Germany, but produced in China. The use of a pneumohydraulic drive makes it possible to significantly accelerate the rod while lowering onto the pressed part or surface. For a hydraulic press, you just need to connect an external source of compressed air. This can be a regular compressor with an 8 At receiver.

Advantages of the model WIEDERKRAFT WDK-HP201:

• relatively light weight - 90 kg, for hydraulic presses with manual drive the total weight of the structure is 120-130 kg;
• rapid lifting of the piston and rod; removing the part from the press table takes 2-3 times less time than with a simple hydraulic machine.

There is an automatic protection valve. The liquid will be discharged into the return chamber if there is a sharp drop in pressure in the cavity above the piston. Models type The WIEDERKRAFT WDK-HP201 can be used for part-line processing. This scheme is often used in large auto repair shops, where the number of similar pressing and pressing operations can reach several hundred per shift.

The disadvantage is the rapid contamination of hydraulic fluid with dust and water vapor from the air. Therefore, it is recommended to connect the air line through an oil/water separator.

Trommelberg 50

Designed by a well-known power equipment manufacturer.In this case, the model is manually driven and has a huge (as for a simple scheme) pressing force — 50 t.

Equipment characteristics:

• weight — 264 kg;
• maximum force on the rod - 50 t;
• maximum output of the working rod - 120 mm;
• The position of the work table on the frame can be adjusted from 8 cm to 106 cm.

Hydraulic fluid is pumped into the working cylinder using a hand pump SD200850 with two speeds: dFor fast feed and precise rod movement. A pressure gauge is installed on the cross member, closer to the right rack on the pump drive side. When the master operates the pump handle, pumping liquid into the press chamber, the pressure gauge is in front of his eyes. It is impossible to make a mistake in the effort made.

For most vehicle repair tasks this is more than enough, so the model Trommelberg 50 may seem too expensive, heavy and ineffective. In fact, this is a press with increased accuracy of the upset of the parts being connected.

By manual feed, you can adjust the force and accuracy of movement with an accuracy of up to 0.5 mm. As a result, the quality of pressing of critical parts is perfect. Therefore, when assembling engines, it is usually recommended to use a press. Trommelberg 50, although in terms of the amount of force applied, it was possible to use a 20-ton hydraulic pump with a pneumatic drive.

Price - 160 thousand rubles, warranty - 6 months.

Stankoimport SD0881

Hydraulic press of the Russian brand "Stankoimport”, the design has been around for more than two decades, and during this time the popularity of the hydraulic press has only increased. Not least due to the fact that the main production of equipment was located in Taiwan.

This model is a classic version of a hydraulic press with an electric pump that supplies working fluid to a chamber with a rod. The drive uses an electric motor with 3500 W at 380 V. That is, such a drive provides very fast lowering and raising of the rod. The press is designed for high productivity.

Characteristics:

• weight - 360 kg;
• force - 50 t;
• the stroke of the piston rod is 200 mm;
• table 70 cm wide.

The increased working space allows you to place motor blocks or even continuous axles from SUVs and trucks on the press. In general, the accuracy and reliability of the mechanism is sufficient for work in a garage or auto repair shop.

High price - 350 thousand rubles, the warranty on the press can be extended by the manufacturer up to lifetime under a separate agreement.

Torin TY100001

The press is completely designed and manufactured in China by TORIN. It is clear that the company’s engineers did not develop or optimize anything, but only borrowed the best solutions from the most popular models of European brands. Nevertheless, the press turned out to be quite reliable.

Characteristics:

• the force developed on the rod is 50 tons. This is enough for a small auto repair shop that repairs the chassis and engines of cars and trucks;
• rod stroke - 200 mm;
• manual pneumohydraulic drive;
• the press weighs 293 kg.

The bed can be raised by 90 cm. The increased distance between the posts and a wide range of table positioning heights makes it possible to work with almost any components and mechanisms of modern cars.

The hydraulic cylinder is made of stainless steel, the piston is nickel plated, and the rod is coated with a 0.8 mm thick layer of zinc.In addition, the mechanism uses double sealing of the rod and air chamber with rings made of wear-resistant polyurethane.

It is operated by a handle, but air, not liquid, is pumped into the cylinder. You have to make an additional amount of “pumping” with the handle, but the rod comes out and returns to place much faster than with conventional hydraulic models. There is no need to connect the press to the pneumatic line.

You can also note a convenient dial pressure gauge with a white scale. It is larger than traditional instruments that display force in tons. There are smaller divisions, so the press is easier to control based on the force on the rod.

Price - 175 thousand rubles. Warranty - 1 year.

This is useful: Press jaws for metal-plastic pipes.

Results

Choosing the best press is not difficult if you know exactly what tasks the equipment is being purchased for. Most of the top most popular models are similar to each other and differ only in the drive circuit, force and frame dimensions. Therefore, it is almost impossible to get confused in different models.

Tell us about your experience working with hydraulic presses. Which of them, in your opinion, turned out to be the most convenient to work with? Write comments, bookmark the article and share it on social networks.