LED floodlight with light sensor: TOP-5 best offers on the market + selection criteria
External lighting is not only a guarantee of convenience and an attractive exterior, but also the safety of your property.Poorly lit entrances, courtyards, warehouses and parking lots often attract intruders, don’t you agree? In places where the owners have taken care of high-quality light sources, thefts and other incidents occur less often. A powerful LED floodlight with a light sensor does an excellent job of turning dark corners into safe areas.
The advantages of such models lie not only in their durability and the power of the light produced. Such a spotlight does not need to be turned on manually: the sensor reacts in time to a decrease in the light level and activates the device without human intervention. This is especially convenient in winter, when daylight hours are rapidly decreasing every day. Additionally, this mode allows you to save energy, because the spotlight turns off itself as soon as morning comes.
We have prepared a rating of the best LED floodlights that respond to light levels. In this material we will take a detailed look at their technical characteristics and tell you how to choose the optimal model for lighting a specific area.
The content of the article:
TOP 5 LED spotlights with light sensor
Horoz Pars/S-50 068-009-0050
The most powerful model with a motion sensor
The most expensive spotlight in the rating has the most advanced characteristics. In addition to a sensitive light sensor, the model also has a sensor that responds to moving objects. Thanks to this, resources are saved as much as possible, since energy is spent only when the user comes within the range of the device. The motion sensor will additionally signal that someone else has entered the area.
Complete protection from dust and directed jets of water allows you to safely install Horoz Pars near drainpipes. Even if a hole appears in this structure, and streams of water begin to fall on the spotlight, the lighting equipment will not fail and will continue to work.
Specifications:
- service life – 30 thousand hours;
- degree of dust and moisture protection - IP65;
- voltage – 220 V;
- number of LEDs in the lamp – 84 pcs.;
- color temperature – 6400 K;
- installation method: wall-mounted.
The modification is ideal for large private courtyards, cottage villages, stadiums and sports grounds, protected areas, for the control of which it is important not only the presence of lighting, but also notification of movement on the site.
- Motion Sensor
- Reliable protection against dust and water
- Long-term operation
- Rugged housing
- Two-year manufacturer's warranty
- Higher cost
- Motion sensor requires fine tuning
Horoz Pars/S-30 068-009-0030
The ideal combination of price and characteristics
The second model from the Turkish brand Horoz is inferior to the first only with less power, which is why the luminous flux indicator is also reduced. But the declared power of the spotlight with a cold bluish glow is quite enough to illuminate a fairly large area.
Dust and moisture protection remains at the same level: the housing with aluminum fittings does not allow the smallest particles to pass through, which qualitatively affects the durability of the device. The lamp, which includes 48 LEDs, will last at least 30 thousand hours. The manufacturer supports a replacement warranty for two years in cases where the spotlight does not fulfill the stated period.
Specifications:
- service life – 30 thousand hours;
- degree of dust and moisture protection - IP65;
- voltage – 220 V;
- number of LEDs in the lamp – 48 pcs.;
- color temperature – 6400 K;
- installation method: wall-mounted.
The modification is optimal for local areas, lighting at entrances and places with high humidity.
- Price
- Reading the movement of objects
- Acceptable power
- Decent luminous flux
- Decent warranty period
- Requires filigree sensor configuration
ULF-Q512 10W/DW SENSOR IP65 220-240V BLACK
The most budget modification
The compact spotlight from Volpe is designed to illuminate small areas and will be available to customers at an extremely reasonable price. The sensitive sensor quickly responds to any movement.The device can withstand temperatures from -30 to +40 degrees, so it can be installed outdoors without fear. However, it is worth providing a protective visor that will prevent the spotlight from overheating in direct sunlight.
Low cost does not affect the dust and moisture protection parameter. Like the more expensive Turkish Horoz floodlights, the ULF-Q512 is reliably protected from the smallest pollutants and serious water flows. Additionally, the device can withstand voltages up to 230 V, so it will not fail due to minor fluctuations in the power supply.
Specifications:
- service life – 30 thousand hours;
- degree of dust and moisture protection - IP65;
- voltage – 230 V;
- number of LEDs in the lamp – 14 pcs.;
- color temperature – 6500 K;
- installation method: wall-mounted.
The model produces cool daylight, covering a fairly limited space, so it is ideal for areas that require several lighting sources around the perimeter.
- Extremely low price
- Long service life
- Wide operating temperature range
- Decent build
- Secure fastening
- Weak power
ULF-Q512 30W/DW SENSOR IP65 220-240V BLACK
Decent characteristics at an affordable price
The 30-watt spotlight is inferior to models with similar power in the rating only by a slight decrease in luminous flux. However, this has virtually no effect on the quality of lighting in the area.
The reliable and compact design is delicately mounted on the wall. However, it is still worthwhile to provide additional protection from the sun for the model, since under direct rays the surface of the black case can heat up above the permissible 40 degrees.
Specifications:
- service life – 30 thousand hours;
- degree of dust and moisture protection - IP65;
- voltage – 220-240 V;
- number of LEDs in the lamp – 30 pcs.;
- color temperature – 6500 K;
- installation method: wall-mounted.
A floodlight with a power of 30 W is optimal for illuminating large areas around the house, parking lots and construction sites.
- Power
- Price
- Long service life
- Bright cold glow
- Compact dimensions
- Requires additional sun protection
016 FL LED 10W 6500K IP54
Miniature inexpensive model
The spotlight with compact dimensions has all the necessary sensors for optimal operation in outdoor conditions. However, the dust and moisture protection rating of 54 IP indicates that a small number of dust particles can still penetrate inside the case. The device will not withstand the impact of a jet of water, but remains insensitive to splashes. Therefore, it is still better to mount the model from Elektrostandard in places that are more protected from water and dust.
The service life of the device is also slightly reduced, which is fully compensated by the warranty replacement within a year.
Specifications:
- service life – 25 thousand hours;
- degree of dust and moisture protection – IP54;
- voltage – 220-240 V;
- number of LEDs in the lamp – 14 pcs.;
- color temperature – 6500 K;
- installation method: wall-mounted.
The model can be used for installation outdoors, but you should pay more attention to the mounting location.
- Withstands voltage up to 240 V
- Sensitive sensors
- High quality build
- 1 year warranty
- Bright cold light
- Insufficient degree of protection from moisture and dust
- Reduced working life
Criteria for choosing LED lamps
Products from the field of lighting technology have quite a lot of indicators - it’s easy to get confused about them without special knowledge. Devices with similar characteristics can produce light of different intensities and warmth. There are even more requirements for floodlights that will be used outdoors, because they will be constantly exposed to natural phenomena.
Before choosing a floodlight with an LED lamp, light sensors and movement It is worth paying attention to the most key parameters.
Criterion #1 - power and luminous flux
Closely related characteristics on which the brightness of future lighting actually depends. The higher the power indicator, the more intense the spotlight will burn. However, in order to understand whether the LEDs have enough potential, you need to take into account both the area of the illuminated area and the height at which the device will be installed. The higher the installation is made, the more light will be scattered.
To calculate the potential illumination level, it is necessary to divide the luminous flux value by the area of the illuminated area. The result obtained is measured in lux (lx). An acceptable indicator of the average illumination of streets and squares, areas near shopping centers is a value of 10 lux. For residential buildings this figure is reduced to 4 and 6 lux. However, the buyer can always choose a floodlight to suit his needs, using the standards only as a guide.
Criterion #2 - color temperature
The characteristics of the visible light produced by the spotlight depend on this indicator, measured in degrees Kelvin (K). The light can be cold with a characteristic bluish glow or warm, with a pleasant yellowish tint. More details about color temperature and power lamps we described in this article.
Spotlights with color temperature settings of 5000 K and above emit cold light. Anything between 2700-3000 K appears as a warm glow.
Criterion #3 - protection from dust and moisture
In addition to anti-vandal qualities, the spotlight must have a suitable degree of protection against dust particles and water - IP. The parameter has a digital designation and is deciphered using special tables.
The first number indicates the device’s immunity to dust and must be at least 5. In this case, a small amount of particles may get inside the housing, but this will not affect the operation of the spotlight. The number 6 indicates that the device is completely dustproof.
The second number characterizes the features of the interaction of equipment with water. For floodlights, acceptable indicators are 4, 5, 6: protection against splashes, drops and strong water jets, respectively.
Conclusions and useful video on the topic
The installation of the LED spotlight is demonstrated in the following video:
LED floodlight is a bright and economical lighting device, ideal for industrial premises, home areas, construction sites and any protected areas.The presence of motion and light level sensors significantly expands the functionality of the device, allowing you not only to illuminate the desired area, but also to find out in time that strangers have entered the facility.
Are you already using an LED spotlight or are you just choosing the right option? If you use it, share your impressions with our other readers - the feedback form is located below this publication. If you have questions, ask our experts.
